How do I reset my Plantronics m165 Bluetooth?

Turn the headset on. Press and hold the call control button for about 5-6 seconds until the light on the headset starts flashing red-white. Release the button and set the headset aside.

How do I pair my PLT headset?

Start with your headset powered ON, press and hold the call control button until the LED flashes red and blue. Activate Bluetooth on your phone and search for new devices, the name of the Plantronics Bluetooth headset will appear as “PLT” followed by the model name.

How do I connect my iPhone to my PLT headset?

Bluetooth Headsets: How to Pair with an iPhone

1. On your iPhone, press Settings > General > Bluetooth.
2. If Bluetooth is turned Off, tap to turn it On.
3. Place your Bluetooth headset into pairing mode.
4. When you see your Plantronics device name, tap it to pair and connect.

How do I reset my PLT Bluetooth?

Reset Plantronics Bluetooth Headset

1. Remove the Plantronics headset from your cell phones paired devices.
2. Power your cell phone off, then power it back on.
3. Pair your Plantronics headset back to your cell phone (follow manual if unsure how)
4. Your Plantronics headset should now be reset.

Why won’t my PLT headphones connect?

Power the cell phone on again. Pair the headset with your phone again. If the issue persists, try pairing the headset to a different cell phone. If the issue persists, replace the headset.

Why won’t my PLT headphones connect to my phone?

Why is my Plantronics headset not connecting to iPhone?

Make sure that your Bluetooth accessory and iOS or iPadOS device are close to each other. Turn your Bluetooth accessory off and back on again. Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.

How do I factory reset my Plantronics?

Hold down the MINUS (-) volume control and the black power button at the same time until the blue light goes out. Step 3 Wait 1 minute for the reset to power down the software and clear firmware.

How do I get my Plantronics Bluetooth in pairing mode?

Start with your Plantronics device powered ON, then press and hold the dedicated Bluetooth button until the LED flashes red and blue. Activate Bluetooth on your phone and search for new devices, the name of the Plantronics device will appear as “PLT” followed by the model name.

How do I clear my Plantronics Bluetooth?

To do this download Plantronics Hub (for Mobile) app, make sure your headset is on and connected to your mobile.

1. Got to Hub Mobile Settings.
2. Scroll down to the bottom.
3. Select Reset Headset.