Can I do my own Timbor?

Apply Timbor as a spray solution (use the Chapin Premier 2 Gallon Sprayer ) on all bare wood surfaces exposed in the flooring or sub floor. Attics- Apply Timbor as a spray solution (use the Chapin Premier 2 Gallon Sprayer ) to all exposed wood in rafters, ceiling joists, plywood, OSB, trusses, top-plates, etc.

How long does Timbor treatment last?

The manufacturer states that Timbor will last for the life of the wood as long as the wood is not exposed to rain or flooding. It will stay in the wood forever because of how it bonds to the cells of the wood.

How do you mix timbor professional?

To prepare a 10% Tim-bor solution, add 1 lb Tim-bor powder per gallon of water, then add the remainder of the water, agitating until the Timbor has dissolved. To prepare a 15% solution, add 1.5 lb per gallon of water.

How do you use timbor insecticide?

Tim-bor can be applied to attics to help kill and prevent drywood termites. Use Tim-bor as a liquid solution and spray top plates, plywood, rafters, drywall backing and OSB panels. For areas that already have insect, termite and/or decay fungi infestation, drill and inject foam or liquid Tim-bor.

How long does Timbor take to work?

Depending on thickness of the wood, Timbor can take up to 30 days or more to completely kill the insects inside the wood. However, it will only kill beetles that are active since Timbor kills the insects when they eat the wood, they ingest the Timbor at the same time.

Which is better Bora-Care or Timbor?

Just to recap if you have an existing infestation, you should use Bora-Care. If you are just treating wood to be used in new construction or surface fungus, then Timbor is fine to use. Both products are very safe, virtually odorless and do not require respirators unless you are in a enclosed space with no ventilation.

Is Timbor toxic to humans?

Ingestion: Products containing Tim-bor are not intended for ingestion. Tim-bor has a low acute toxicity. Small amounts (e.g., a teaspoonful) swallowed accidentally are not likely to cause effects; swallowing amounts larger than that may cause gastrointestinal symptoms. Cancer: Tim-bor is not a known carcinogen.

How much Timbor do I need?

Apply Timbor at a rate of 5 gallons of liquid solution per 1000 square feet of wood surface area. Therefore, you will need to calculate the total of the wood surfaces you wish to treat in the basement to find the amount of Timb… 1. 5 pounds of Timbor will treat up to 200 sq.

Is timbor toxic?

Timbor is made from the element Borate, which is a natural occuring element in the earth. It is very safe and non-toxic.

What is timbor made of?

The active ingredient in Tim-bor is DOT — Disodium Octaborate Tetrahydrate — a non-corrosive borate mineral salt that is deadly to drywood termites and other listed pests that will not break down over time.

How long does timbor take to work?

Is timbor toxic to humans?

Is timbor corrosive?

Answer: Tim-bor Professional is labeled as non-corrosive so it will not cause metals to rust.

What is the difference between Bora-Care and timbor?

Timbor is used at 1.5 lbs of Timbor to each gallon of water. Bora-Care is mixed 1:1, one gallon of Bora-Care to one gallon of water which will make two finished gallons.

What is Timtim-Bor insecticide?

Tim-Bor Insecticide is produced by Nisus Corporation. It is applied to various types of wooden surfaces and acts as a barrier to prevent damage caused by insects and fungus. The product contains the active ingredient, disodium octaborate tetrahydrate (DOT), which is a natural mineral salt that can be applied as a dust, foam, or liquid.

What is Tim-Bor®?

Tim-bor® is the inexpensive insurance every log homeowner needs. Rot and beetles and termites – oh my! Tim-bor® is the inexpensive insurance every log and wood homeowner needs. When sprayed or brushed on bare wood, this borate-based log home preservative forms a protective shell to defend against rot and wood-ingesting insects.

What is the active ingredient in Tim-Bor?

Tim-bor Professional is available in 1.5-lb. bags, 25-lb. pails, 250-lb. drums and 1500-lb. Super Sacks. Tim-bor Professional’s active ingredient is Disodium Octaborate Tetrahydrate (DOT), a natural borate mineral salt and micronutrient.

Does Tim-Bor kill mold?

No. Mold is a type of fungi that exists on the surface of the wood and does not actually attack or eat wood (although it can cause some discoloration of the wood surface). Tim-bor’s great strength is its ability to control wood-destroying fungi that actually cause rot.