Who makes Flanders air filters?

In April 2016, American Air Filter Co. Inc., (AAF International), acquired Flanders Corp., to form AAF Flanders. With production, warehousing and distribution facilities in 22 countries across four continents, AAF International, a subsidiary of Daikin Industries, has been influential in improving indoor air quality.

How long do Flanders air filters last?

every 30 days
A flat filter, such as the Flanders Front Panel Filter (available on Amazon), is designed to be changed every 30 days.

Where are Flanders air filters made?

Washington, North Carolina
Founded in Washington, North Carolina, Flanders has expertly designed and manufactured air filtration solutions for commercial and residential HVAC systems, semiconductor manufacturing, chemical, biological, radiological and material processing, biotechnology and pharmaceuticals since 1950.

What MERV rating is Flanders EZ Flow?

MERV 4 rating
AAF Flanders EZ Flow air filters are available in 1″ and 2″ depths with a MERV 4 rating and are made with a metal retainer on one side to provide extra reinforcement.

What are the MERV ratings on filters?

An air filter’s minimum efficiency reporting value (MERV) rating measures how effectively the filter stops dust and other contaminants from passing through the filter and into the air stream. Filters with higher MERV ratings trap small particles more effectively than filters with lower MERV ratings.

What are Flanders air filters made of?

filament spun glass
From the Manufacturer The filtering medium is continuous filament spun glass. The frame is made with one continuous piece of chipboard to guard against corner separation and is strengthened by a metal retainer.

What happens if air filter is backwards?

If you set your filter up backwards, the normally collective end of the device will not face the air supply. In effect, your filter will help keep debris in the air. This results in a clogged filter and improperly cleaned air when it reaches your lungs.

Is MERV 13 enough for Covid?

What kind of filter should I use in my home HVAC system to help protect my family from COVID-19? Minimum Efficiency Reporting Values, or MERV, reports a filter’s ability to capture particles. Filters with MERV-13 or higher ratings can trap smaller particles, including viruses.

Is MERV 13 too high for home?

MERV 13 air filters are the highest-rated air filters for home use. Any air filter with a rating higher than 13 will restrict air flow to the point of which could cause damage to your HVAC system, resulting in an added expense to fix it.

Are pleated filters bad for AC?

Pleated filters are bad for your system because they block too much air, forcing the HVAC motor to work harder to pull in the air it needs and burning it out faster.

What material filters air the best?

Spun fiberglass is an affordable and reliable resource for filtering air and trapping contaminants. Fiberglass is excellent for trapping large contaminants, such as dust and pet dander, and it often helps maintain superior air flow. Many HEPA filters are made primarily from fiberglass.

Which way should the arrow point on an air filter?

Slide the new filter in with the arrow pointing toward the furnace. Replacing your air filter is not difficult. Remember that air flows from your ducts, through the filter, and into the furnace. The arrow on the filter should always point toward the furnace.

How do I know which way to put in an air filter?

To properly insert a new filter, look for the arrow! The arrow on your filter should always face the unit and away from the return air duct that carries the air that will be heated or cooled. HVAC systems push the cool or warm air out and pull spent air in, recirculating the air throughout your home.