What size is the drain plug in an Acura TL?

Dorman – Autograde – Oil Drain Plug Standard M14-1.50, Head Size 17mm (Part No. 090-033.1)

What size socket is my oil drain plug?

3/8-inch
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine.

What size bolt is a oil drain plug?

Oil Drain Plug Socket: 3/8 in Drive Size, 17 mm Socket Size, 6-Point, Std, Anodized.

What size is the oil drain plug on a 2004 Acura TL?

17mm
Dorman – Autograde – Oil Drain Plug Standard M14-1.50, Head Size 17mm (Part No. 090-033CD)

What wrench do you need to change oil?

You’ll need a ratchet and socket set to remove the oil drain plug, an oil filter wrench (or maybe just a strong grip) to remove and install the filter, a drain pan to catch the spent oil, and a funnel to refill it.

What tool do I need to change oil?

In addition to oil, you’ll need an oil filter, an oil-filter removal wrench, a wrench to remove the drain plug, a funnel, a drain pan and some gloves. You may also need to raise the car to gain access, in which case you’ll need a floor jack and safety stands, or a pair of purpose-made steel ramps.

How do I know what size drain plug I have?

Measure Diameter Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.

What size is Honda oil plug?

What type of oil does a 2005 Acura TL take?

Mobil 1 – Advanced Full Synthetic 5W-20 Motor Oil, 5 Quart (Part No. 14991)

Is it OK to just hand tighten an oil filter?

Yes, you can tighten the oil filter by hand. It is just fine to tight it with your hands, you just need to be careful not to over-tighten so that you don’t cause any leaks or damage.

Do you really need an oil filter wrench?

Every reputable oil filter is designed to seal for tens of thousands of miles with no more than a good hand-tightening. You don’t need a wrench unless you have one of those deeply recessed filters with no space around it for your hands. (If that’s the case, the only choice is a cap wrench.)

Are there different size drain plugs?

【6 Different Sizes Meet Your Needs】Totally 6 pieces drain stopper are in 6 sizes, namely 7/8 inch to 1 inch, 1-1/8 inch to 1-1/4 inch, 1-3/8 inch to 1-1/2 inch, 1-5/8 inch to 1-3/4 inch, 1 inch to 1-3/8 inch, 1-1/2 inch to 2 inch various sizes drain stoppers are suitable for most sink, meeting daily needs. 2.

What size is Honda oil drain bolt?

How much is a drain plug?

The general range is between $100 and $350, but there are some vehicles that cost more. You can get an oil pan gasket replacement for between $40 and $150. The part is not the most expensive part of the repair, but the labor can be very intensive.

What type of oil does an Acura TL use?

Mobil 1 – High Mileage 5W-20 Full Synthetic Motor Oil, 5 Quart (Part No. 120768)