What is an oatey box?

Oatey® Eliminator® Washing Machine Outlet Boxes are designed for commercial or residential applications that require a supply valve and waste drain recessed into the wall with an additional drain port. Secondary drain port is commonly used for AC condensate, water softener, discharge and /or humidifier lines.

What is a water supply box?

Water supply control boxes are a stainless steel box for sanitary can wash and flushing rim floor drains. They have a thermostatic mixing valve, 1/2 in. NPT outlet connection, 1/2 in. NPT hot and cold water inlet connections, integral atmospheric vacuum breaker, and hinged locking door.

How high should a washing machine outlet box be?

32” to 34”
Once you’ve selected the right washing machine outlet box for your situation, it should be installed at a height where the flood level rim (or the top of the drainage outlet) is 32” to 34” above the finished floor.

How do you hide water valves in laundry room?

Here is a multitude of ways that you can hide pipes in your laundry room:

1. Go industrial.
2. Cover them with design tape.
3. Add wood pipe wrapping.
4. Add a bit of foliage.
5. Cover them with bins.
6. Build a false wall.
7. Replace them with better looking pipes.
8. Add wraparound lights.

How do you hide plumbing in a laundry room?

How To Hide Laundry Room Plumbing

1. Building Shelves. Building shelving around or in front of your laundry pipework is one of the best ways to hide them from view.
2. Using Wood Pipe Covers.
3. Adding Some Foliage.
4. Installing Sliding Doors.
5. Boxing the Pipework in Paint and Wood.
6. Using Wraparound Lighting.

What is a washer box in plumbing?

Laundry boxes are recessed into the wall behind the washing machine and provide water supply line connections and a wastewater drain. These outlets improve the look of your laundry area by hiding pipes and tidying hoses. More importantly, they provide easy shutoff valves in the event of a leak or a burst hose.

Does washing machine receptacle need to be GFCI?

There is no specific requirement in the NEC for the washing machine itself to have GFCI protection. Section 210.52(F) requires a receptacle outlet to be installed for the laundry area and it must be supplied by a 20-ampere branch circuit in accordance with 210.11(C)(2).

Can I use PEX for washer?

PEX to the clothes washer is still working fine.

How do you hide plumbing behind a washer and dryer?

How To Hide Laundry Room Plumbing

1. Building Shelves. Building shelving around or in front of your laundry pipework is one of the best ways to hide them from view.
2. Using Wood Pipe Covers.
3. Adding Some Foliage.
4. Installing Sliding Doors.
5. Boxing the Pipework in Paint and Wood.
6. Using Wraparound Lighting.
7. Wrapping up.

Do you need a sink in the laundry room?

Sinks are some of the most important fixtures in a laundry room. This is because we do a lot of washing in the laundry room and hence we need the sinks for this purpose. Ordinary sinks will serve you well in your laundry room. But if you really want to make a laundry room work, install a utility sink.

Does a washer box need a vent?

All plumbing fixtures—including washing machines—must be vented. Improperly vented drains can be sluggish and noisy, and can emit hazardous fumes. Properly vented drains allow the P-trap to do its job: prevent sewer gases from escaping into your home.

Does a washer drain need a trap?

If your washing machine drains to a sewer line, such as a city sewer system or a septic tank, it must have a P-trap. A P-trap contains water in its bend. This water is an essential vapor barrier that prevents sewer gas from coming up through the drain line and entering your home.

Do washing machines need a water hammer arrestor?

Quick Closing: The model plumbing codes indicate that when quick-closing valves are installed, a water hammer arrestor is required. The problem is that every code has a slightly different definition of quick-closing valves. Dishwashers and washing machines always used to be considered as having quick-closing valves.

How far can a vent be from a washing machine?

It prevents the possibility of a vacuum forming which could affect the water draining from your washing machine. If your washing machine is more than 4 feet from the vent stack, you should install a vent to make sure there’s enough room for the machine to drain properly.

What is an Oatey supply box?

Oatey® Supply Boxes can be used in commercial or residential applications that require supply valves and waste drains recessed into the wall. Available configurations include Kitchen, Dishwasher, Ice Maker, Washing Machine, Lavatory, Toilet and Air Admittance Valves.

What is an Oatey® exclusive?

Oatey® Exclusive feature. Using a single box platform provides significant convenience to installers. One universal faceplate and common metal brackets can be used on any MODA Fire-Rated supply box. Unique interlocking wing flanges accommodate on-stud and straddle-stud.

What is included in the Oatey Waching machine box?

Please refer to the Oatey Limited Warranty for warranty details. MODA Fire-Rated Waching Machine box includes two valves with 3/4″ male thread outlets and a separate box with a drain port. Each box includes a faceplate, a pre-installed intumescent pad for protection under extreme heat, metal brackets and a debris cover.

What is included in each box?

Each box includes a faceplate, a quarter turn test plug, pre-installed intumescent pad for protection under extreme heat, metal brackets and a debris cover. Using a single box platform provides significant convenience to installers.