How much does a 140 International tractor weigh?
How much does a 140 International tractor weigh?
The International 140 began as the industrial version of the Farmall 140….International Harvester 140.
| Dimensions & Tires | |
|---|---|
| Wheelbase: | 71 inches 180 cm |
| Weight: | 2700 to 3000 pounds |
| Front tire: | 5.00-15 |
| Rear tire: | 9.5-24 |
How much horsepower does a 140 International have?
Farmall 140
| Model history | |
|---|---|
| Engine make | International |
| Engine model | C-123 |
| Fuel type | gasoline |
| Power hp | 26 net, 23 pto, 21 drawbar |
How much horsepower does a Farmall 140 have?
Farmall 140
| Farmall 140 Power | |
|---|---|
| Drawbar (claimed): | 17 hp 12.7 kW |
| PTO (claimed): | 21 hp 15.7 kW |
| Plows: | 1 |
| Drawbar (tested): | 21.25 hp 15.8 kW |
What replaced the Farmall 140?
| Farmall A | |
|---|---|
| Drawbar pull | 2,387 pounds (1,083 kg) |
| NTTL test | 329 |
| Preceded by | Farmall F-14 |
| Succeeded by | Super A/A-1, followed by Farmall 100/130/140 |
What engine is in a Farmall 140?
Farmall 140 Engine
| Engine Detail | |
|---|---|
| International Harvester C-123 | |
| Displacement: | 122.7 ci 2.0 L |
| Bore/Stroke: | 3.125×4.00 inches 79 x 102 mm |
| Air cleaner: | oil bath |
How much does a Farmall Super A weigh?
Farmall Super A
| Model history | |
|---|---|
| Length (inches/metres) | 106 in |
| Width (inches/meters) | 56 in |
| Height (inches/meters) | 64 in |
| Weight (nominal) lb/kg | 2385 lb |
What is the difference between a Farmall Super A and a Farmall 140?
Homochitto: The single biggest difference is the engine and some it’s components. A factory original SA would have the C-113 engine while 140 has C-123 engine. The 140 will have a water pump although Super A could have had that added, however it is not the same water pump.
How wide is a Farmall 140 tractor?
Farmall 140 Dimensions
| Dimensions | |
|---|---|
| Wheelbase: | 71 inches 180 cm |
| Length: | 107 inches 271 cm |
| Height: | 83 inches 210 cm |
| Height (steering wheel): | 65 inches 165 cm |
Is Farmall and International the same?
The International Harvester Company used a handful of different brand names for its tractors, like “McCormick,” “McCormick-Deering,” “International,” and “Farmall.” Very similar tractors were sold under these names at the same time – sort of like the relationship between a Lincoln Navigator and a Ford Expedition.
When did they stop making international tractors?
On May 14, 1985, the last IH tractor rolled off the factory line, a 5488 FWA.
How wide is a Farmall 140?
I have two Farmall 140 tractors, both with 12.4 x 24 tires. Center of tire to center of tire measures 44 1/2 inches. Inside of tire to inside of tire measures 33 1/2 inches. Outside of tire to outside of tire is approximately 57 inches.
What does Ah Farmall tractor weigh?
Farmall H
| 1941 Farmall H | |
|---|---|
| Length | 125.25 inches (318.1 cm) |
| Width | 75.7 inches (192 cm) |
| Height | 74 inches (190 cm) to steering wheel) |
| Weight | 2,845 pounds (1,290 kg) |
What is the difference between a Farmall A and a Farmall Super A?
The noticeable difference between the Super A and A-1 is the distance between the fuel tank and the hydrualic reservoir… the Super A has about a 3/4″ space between the two, while the A-1 has about a 2″ space.
What size is the front tire on a Farmall 140?
5.00-15
Farmall 140 Dimensions
| Farmall 140 Tires | |
|---|---|
| Ag front: | 5.00-15 |
| Ag rear: | 11.2-24 |
Why did international go out of business?
The final loss of IH independence in 1984 came after a long period of profit margins below those of its competitors. Traditionally, IH farm equipment had been the largest product line, even though the truck division had grown rapidly. The construction equipment division had been expanded through acquisitions.
What is difference between international and Farmall?
Farmall was a model name and later a brand name for tractors manufactured by International Harvester (IH), an American truck, tractor, and construction equipment company. The Farmall name was usually presented as McCormick-Deering Farmall and later McCormick Farmall in the evolving brand architecture of IH.
What are the dimensions of the International Harvester 140?
International Harvester 140 Specifications Model International Harvester 140 Length 2,710 mm (106.7 in) Width 1,420 mm (55.9 in) Height 1,660 mm (65.4 in)
What kind of fuel tank does the International 140 have?
The International 140 is equipped with manual worm-and-sector steering, differential mechanical contracting band brakes, open operator station, and 41.6 liters (11 US gal.; 9.2 Imp. gal) fuel tank.
What is the horsepower of a GMC International 140?
This engine produced 28.4 PS (20.9 kW; 28.0 HP) at 1,400 rpm of output power and 143.7 N·m (14.7 kg·m, 105.9 ft·lb) at 1,400 rpm of peak torque. The International 140 is equipped with manual worm-and-sector steering, differential mechanical contracting band brakes, open operator station, and 41.6 liters (11 US gal.; 9.2 Imp. gal) fuel tank.
What are the specs of a Farmall 140 tractor?
The Farmall 140 is equipped with manual steering, differential contracting band brakes, open operator station and 41.6 liters (11 US gal.; 9.2 Imp. gal) fuel tank. The Farmall 140 tractor could be equipped with the International Harvester 1000 loader.
