How do you reset the drum counter on a Brother HL l2380dw?

How to reset the drum counter:

1. Make sure the front cover is closed.
2. Press the “X” on the printer to display to interrupt the “replace drum” message.
3. Press the tool button (settings) > All Settings > Machine Info. >
4. Hold down the # button on the keypad until the LCD message changes to the reset menu.

How do you reset the drum on a Brother printer HL l23200?

How to reset the drum counter:

1. Open the front cover.
2. Press and hold the “Go” button until all LEDs light up. Once they are lit, release the button.
3. Close the front cover.
4. The Drum LED should now be off.

How do you reset the drum on a Brother HL l2321d?

Press and hold Go for about four seconds until all of the LEDs light up. Once all four LEDs are lit, release Go. Close the front cover. Make sure the Drum LED is now off.

How can I extend my Brother drum life?

You can extend the drum life and keep it clean by occasionally cleaning the corona wire. You can simply do this by sliding the little plastic piece attached to the corona wire back and forth a couple of times. After you replace your drum, don’t forget to reset it.

How do I reset my Brother printer HL?

HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL

1. Press. [Settings]>[All Settings]>[Initial Setup]>[Reset].
2. Press or. to display the type of reset functions, and then press the reset function you want to use.
3. Press the option in the table to reboot the machine or to exit the process. Option.
4. Press .

How do you reset the drum on a Brother HL 1110?

Brother Drum Reset – HL1110 and HL1210W

1. Turn the printer power switch on.
2. Press the power button 4 times.
3. Your drum counter is now reset.

How do you reset the drum counter on a Brother printer HL l2380dw?

What is the typical drum life of a brother hl-5470dw?

Brother states that the typical drum life is approximately 30,000 pages. But you may have replaced the drum unit, only to find that the printer is still indicating that the drum life is low. This is because you also need to reset the drum life counter on the Brother HL-5470DW.

How do I clear the page count on my brother hl-5470dw?

Open the front cover. Press and hold the green Go button for 5 seconds, until you see Drum Clear. As mentioned previously, Brother identifies the typical page count of a Brother HL-5470DW drum to be about 30,000 pages.

How to reset brother hl-5450dn drum counter?

After replacing new drum for Brother HL-5450dn, HL-5470dw, HL-6180dw & HL-6180dwt laser printer, you need to reset the drum counter. Hold down Go until the Drum Clear message is displayed on LCD, then release Go. Press and hold down Go for about 4 seconds until all the LEDs light up.

Does the brother hl-5470dw laser printer need its toner cartridge replaced?

The Brother HL-5470DW laser printer, like every other laser printer, periodically needs to have its toner cartridge replaced. But, less frequently, it also needs to have its drum unit replaced. This is the part in the printer into which the toner cartridge is placed.