How do I put my Plantronics into pairing mode?
How do I put my Plantronics into pairing mode?
Press and hold the Call button until you hear “pairing.” While the headset LEDs are flashing blue and red, activate Bluetooth on your phone and set it to search for new devices. Select “Poly V5200 Series.” Once successfully paired, indicator lights will stop and you will hear “pairing successful.”
How do I pair my Plantronics wireless headphones?
Press and hold the call control button for 5 or 6 seconds until the light starts flashing red and blue (some models flash red and white). Release the button and set the headset aside. Follow the pairing instructions for your cell phone or other Bluetooth device. If prompted for a passkey, enter 0000 (four zeros).
How do I pair my Plantronics 220?
Start with the Plantronics Explorer 220 headset off. Turn on the headset by pressing and holding the call control button for 5-6 seconds until the indicator LED flashes red/blue. Release the call control button The Explorer 220 headset is now in pairing mode.
Why is my Plantronics not connecting?
Power the cell phone on again. Pair the headset with your phone again. If the issue persists, try pairing the headset to a different cell phone. If the issue persists, replace the headset.
How do I pair my Plantronics Bluetooth to my iPhone?
Bluetooth Headsets: How to Pair with an iPhone
- On your iPhone, press Settings > General > Bluetooth.
- If Bluetooth is turned Off, tap to turn it On.
- Place your Bluetooth headset into pairing mode.
- When you see your Plantronics device name, tap it to pair and connect.
How do I reset my Plantronics Bluetooth headset?
How to Reset a Plantronics Bluetooth
- Turn on the headset by pressing the “Power/Answer” call button.
- Hold down the “Power” button and the “Lower Volume” button (minus button) together until the light goes out.
- Wait for one minute for the reset to be complete.
- Turn on the headset again by pressing the “Power” button.
How do I reset my Plantronics Bluetooth?
Why is my Plantronics Wireless headset not working?
Unplug the headset from the PC’s USB port and reboot the computer. Do not just restart – perform a complete system shutdown and then turn back on, as this will help clear the memory in the USB ports. Plug the headset directly into the PC and not into a hub or docking station.
Why won’t my Plantronics Bluetooth connect to my iPhone?
Make sure that your Bluetooth accessory and iOS or iPadOS device are close to each other. Turn your Bluetooth accessory off and back on again. Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.
Why won’t my Plantronics Bluetooth connect to my Iphone?
How do I reset my Plantronics wireless headset?
Why is my Plantronics headset blinking white?
The power/subscription light (the white light on the base) flashes during the subscription process and glows solid when the headset pairs successfully.
How do I Pair my Plantronics pulsar 260 with my phone?
For the Plantronics Pulsar 260, Begin with pendant powered on. Press and hold both the mute/play/pause button and the power on/off/pairing button simultaneously. When the indicator light flashes red and blue, release buttons. While pendant is flashing red and blue, use the phone menu to search for Bluetooth devices and select “260 Plantronics.”
How do I connect the Plantronics M1500&A500 to my headset?
For the Plantronics M1500 & A500 adapter (discontinued): Turn the headset on and the adapter off. On the headset push in and hold the mute/volume dial until the indicator light begins to flash. On the adapter press and hold the blue power button for 10 seconds.
How do I reset the volume on my Plantronics headset?
Hit and hold the volume/mute switch in until the indication light starts blinking. For the Plantronics M1500 & A500 adapter (discontinued): Turn the headset on and the adapter off. On the headset push in and hold the mute/volume dial until the indicator light begins to flash. On the adapter press and hold the blue power button for 10 seconds.
