How do I configure my Cisco 800 router?

How to Configure Cisco 800 Series Router Configuration for Internet Access

1. Scenario 1: WAN IP address of router is assigned dynamically by the ISP. LAN IP addresses assigned dynamically from the router to the internal PCs.
2. Scenario 2: WAN IP address of router is static.
3. Scenario 3: WAN IP address of router is static.

How do I reset my Cisco 800 Series?

Find the Reset button on the router. Press and hold the Reset button while you power on the router. Release the Reset button after 10 seconds. Wait 5 to 10 minutes for the router to finish booting.

How do I access my Cisco 881 router?

Type 10.0. 0.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your CISCO 881 is Cisco.

What are the steps to configure a Cisco router?

Step-by-Step Configuration of Cisco Routers

1. Step1: Configure Access Passwords.
2. Step2: Configure a Router Hostname.
3. Step3: Configure IP addresses for Router Interfaces.
4. Step4: Configure Routing (Static or Dynamic)
5. Step5: Save your configuration.
6. Step 6 (optional): Configure NAT.
7. Step 7 (optional): Configure DHCP.

How do I configure my initial router settings?

Part 1: Verify the Default Router Configuration

1. Step 1: Establish a console connection to R1. Choose a Console cable from the available connections. Click PCA and select RS 232.
2. Step 2: Enter privileged mode and examine the current configuration. You can access all the router commands from privileged EXEC mode.

How do I configure a cisco router?

How do I clear my running config?

To clear out the running config file, simply erase the startup config file and then reload the device.

How do I reset my password on my Cisco 881 router?

1. Connect your Console Cable to the Router Console Port.
2. Power on the Router. Check your Port. At search type run.
3. open Tera Term. Select Serial & your Port. Press Ok.
4. (1) Power off the Router. (2) locate the Reset Button -> Press and hold it.
5. (1)Login using Cisco 881 Router Default Username & Password. username : cisco.

How do I setup my Cisco router for the first time?

What is initial configuration?

The initial configuration process requires you to configure one target computer at a time. Therefore, you should pick a computer you want to monitor before you begin the initial configuration process.

How do I configure my basic router?

About This Article

1. Connect the router to the modem.
2. Connect the computer to the router.
3. Go to the router’s default IP address in a browser.
4. Sign in with the default username and password.
5. Open the Wireless settings.
6. Name your network.
7. Set an encryption type and passphrase.
8. Save your changes.

How do I exit Cisco config mode?

To exit line configuration mode and to return to global configuration mode, use the exit command. To exit line configuration mode and to return to privileged EXEC mode, enter the end command, or press Ctrl-Z.

How do I clear the running config on a Cisco router?

How to connect CISCO 800 to desk top PC?

type “Cisco AnyConnect”. Right-click the Cisco AnyConnect Secure Mobility Client icon. This will bring up a list of options. Hover over Send to, then click Desktop (create shortcut). *Now that you have a desktop shortcut, you can double-click the icon whenever you want to launch Cisco AnyConnect in the future.

How to reset a CISCO 800 Series router?

Introduction. This document describes how to recover the enable password and the enable secret passwords.

Prerequisites. There are no specific requirements for this document.

Step-by-Step Procedure. Attach a terminal or PC with terminal emulation to the console port of the router.

Example of Password Recovery Procedure.

How to hard reset CISCO 800?

– Windows – If you are using PuTTY, on your keyboard press Ctrl + Break at the same time; or you right click on the bar at the top of the – Mac – If you are using terminal, on your keyboard press Control + A, then Control + B. – You may also refer to the Cisco page on Standard Break Key Sequence Combinations During Password Recovery.

How to configure Cisco 2800 router?

Set up a console connection to your router. The following message is displayed: …

Press Return. The following message is displayed: Cisco Configuration Professional Express (Cisco CP Express) is installed on this device.

Enter the username username1,and press Return or Enter.

Enter the password password1,and press Return or Enter.