Why is the time flashing on my Salus thermostat?
Why is the time flashing on my Salus thermostat?
The hour setting will be the first setting that needs to be adjusted, and this will easily be seen because the ‘hours’ section of the time will be flashing. Using the Touch Ring, scroll up or down to adjust the hour to the required setting and then press the OK key to confirm.
How do you use Salus heating control?
Press Up/Down to set the temperature. Note:To exit the temporary override procedure, you can wait for 3 seconds until the set temperature stops flashing or you can press on the SET button once. Press Override in order to activate the mode. Press Up or Down to set the temperature.
What does the hand mean on a Salus thermostat?
The flame symbol will disappear to show the thermostat is no longer calling for heat, and your boiler will stop. To exit Manual Mode and return to your program schedules, simply press the hand button .
How do I know if my Salus thermostat is working?
To test that the receiver and thermostat are paired, navigate to the Pairing Menu by choosing Menu > Pairing > TEST. This will display ‘TESTING 10’ on the thermostat. If the receiver and thermostat are paired correctly, the RED and GREEN LED’s on the receiver will flash.
Why is my thermostat flashing red?
Possible Causes for a Red Flashing Light High Pressure or High Temperature Switch is On. Low Pressure or Low Temperature Switch is On. Low Discharge Temperature. Liquid Line Sensor Failed.
What does the hand mean on Salus thermostat?
This will put the thermostat into Manual mode and prevent any Program Schedules from running. A Hand Symbol will be displayed on the screen to show you are in Manual Mode.
How do you turn off Salus thermostat?
Press the FROST button once to deactivate the function. Press SET to confirm the changes. Press the buttons together for 3 sec.
How do I reset my Salus thermostat?
The Backlight Liquid Crystal Display (LCD) gives a highly visible, easily readable indication of the programmable thermostat status. Press the buttons together for 3 sec. Press Up or Down to select the hour format. After power up, the thermostat is reset.
