What size Nelson Saucer Bubble Pendant?

Dimensions: Small Canopy: Dia 5.25 in. Small Fixture: H 6.69 in , Dia 17.32 in , Wgt 2.21Lbs. Small Maximum Hanging: L Adj From 12.69 in , Adj To 126.69 in.

What is the Nelson bubble lamp made of?

Inspired by practicality In 1947, George Nelson became obsessed with a spherical white lamp, desperately wanting one for his new design office. Made in Sweden and covered in stretched silk, at $125 these designs were too expensive for Nelson to buy and too tedious to reproduce – so he decided to design his own.

How do you clean a Nelson bubble lamp?

Use a feather duster, a clean soft white cloth, or vacuum with a clean soft brush attachment as needed. For stubborn stains, clean the surface using a clean soft white absorbent cloth with a solution of mild soap and warm water. Wipe down surfaces with the damp cloth and dry with a clean soft white cloth.

Are Nelson bubble lamps dimmable?

Designed by George Nelson in 1952. Finish: White with Brushed Nickel Trim. Material: Soft plastic shade, sprayed and spun around a steel wire frame. Dimmable when used with a Standard Dimmer (Not Included)

How do you install a Nelson bubble lamp?

Take a new 240-volt fluorescent bulb and wipe it with a clean cloth to remove any oils or residue from the surface. Fit the end of the bulb into the socket and rotate it clockwise to install it into the lamp. Continue turning until you can’t turn it anymore. Only compact florescent bulbs will fit into your Nelson lamp.

Who makes Nelson bubble lamps?

Herman Miller®
Nelson® Bubble Lamps® by Herman Miller® are one-of-a-kind lighting creations by George Nelson, which offer a welcome glimpse into modernism. Reminiscent of the soft illumination of a paper lantern, Nelson Bubble Lamps are sure to light up any room with an inviting, warm glow and modern style.

Who invented the bubble lamp?

Carl W. Otis
Bubble lights for Christmas decoration were first patented in the United States by Carl W. Otis in 1944 and introduced there in 1946 by NOMA, one of the largest American manufacturers of Christmas lights.

How do you clean a bubble chandelier?

To clean your powder coated light fixture, dampen a clean microfiber cloth with warm water and mild soap, then rub it gently to remove stains and dust. Dry the surface with a clean, dry cloth. Avoid using abrasive cleaners, strong detergents, and cleaners with bleach as they may damage the finish.

How do you clean wood lamps?

Wooden lamps: Get an oil-based wood soap to clean your precious wooden lamp every few months. You can also wash it with an oil-based cleanser to remove the accumulated grime. Wooden lamps that are frequently used, for instance on the study table, should be cleaned weekly with a duster.

How bright are Nelson bubble lamps?

The lamps can shed serious light—up to 150 watts. “The nice thing about the Nelson is, even though it’s encased, you can still put a bright, bright bulb and just use it on a dimmer,” says George Getlik, the store’s proprietor.

What are bubble lamps?

The material was a soft, yet durable plastic that was spray-coated around a steel wire frame, changing the game of mid-century lighting for years to come. The Bubble Lamps are still produced according to Nelson’s original design, and are available in a range of pendants, floor, table and wall lamps.

Where did bubble lights originate?

Bubble lights for Christmas decoration were first patented in the United States by Carl W. Otis in 1944 and introduced there in 1946 by NOMA, one of the largest American manufacturers of Christmas lights.

How long do bubble lights last?

Do not leave lights up for longer than 90 days.

How do you install a bubble chandelier?

– Using a screwdriver, loosen the plastic screw in the strain relief (mounted on the front of the canopy). – Slide over the chandelier cord until it bumps into the leather/cotton/jute cord. – Tighten the plastic screw on the strain relief and tie a knot in the pendant cord above the canopy.

Is pledge good for wood?

Despite being sold as a furniture polish, you should also avoid using Pledge on your wood, as it builds up waxy layers of silicone that may hide imperfections but not actually help treat the wood in any way.

What year did bubble lights come out?

1946

Can you replace the bulb in a bubble light?

Repair: – DON’T attempt any repair to the light set by cutting, splicing, replacing plug, lampholders, or the end connector. – DON’T try to replace the light bulb inside the plastic housing. – DO replace bubble lights (entire assembly) and fuses (see above for instructions in the trouble shooting section).

Can the Nelson saucer bubble pendant be swagged?

Yes, the Nelson Saucer Bubble Pendant can be swagged. We value your input and invite you to rate and review your purchases. Be sure to explain why you like or dislike the product, and focus on the product’s features and your own experience using it.

What is the wattage of the Nelson saucer pendant?

The Nelson Saucer Pendant is produced in collaboration with the George Nelson Foundation. Bulb (not included): LED, CFL, or incandescent; E26 base; 60W max for small, 150W max for others. UL Listed.

What is a George Nelson saucers glow?

A Sublime Glow — Designed with a durable steel frame and glare-free translucent polymer shade, the George Nelson Saucer Pendant Light emits a warm, diffused glow that enhances your home’s atmosphere. With its disc-like shade accentuated with thin vertical lines, the Nelson Saucer Bubble Pendant (1952) plays with shape and geometry.

Who made the bubble lamp George Nelson?

These beautiful modern George Nelson Bubble Lamps by Modernica are in the permanent collection of the Museum of Modern Art. A midcentury classic icon, the Modernica Bubble Lamp was first designed by George Nelson in 1947 and was produced by Howard Miller from the early 1950s to 1979.