What size chain does a Stihl 038 use?

5-Pack 20″ Full Chisel Saw Chain for STIHL 038 Chainsaws – (20 inch, 3/8″ Pitch, 0.050″ Gauge, 72 Drive Links, CSC-D72) – UpStart Components.

How many cc is an 038 magnum?

Stihl 038 Magnum at 72cc first introduced in 1985 was Stihl’s good attempt to offer a good middle weight saw.

What CC is a Stihl 036?

the 036 is also 61.5cc but has 4.5hp.

What spark plug does a Stihl 038 take?

SPARK PLUG FOR STIHL 031 032 034 038 042 044 045 046 048 056 064 066 084 088 CHAINSAW

Make:	STIHL	ABOVE
Replaces OEM Part Number:	NGK: BPMR7A	CHAMPION: RCJ6Y
	BOSCH: WSR6F
Please Note:
This item is a after market / non genuine replacement part.

What size file do you need for a 3/8 chain?

These simple file guides to maintain the proper angle. Includes file.

Chain Pitch	File Diameter
in.	mm.	in.
1/4 3/8 PM	6.35 9.32	5/32
0.325	8.25	3/16
3/8	9.32	13/64

How can I tell what size my Stihl chain is?

If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The last three numbers (or letters) denote characteristics of the chain.

What CC is a Stihl 039?

Displacement	3.9 cu. in. (64.1 cc)
Engine Power	4.3 bhp (3.2 kW)
Weight (Pwrhd only)	13.2 lbs. (6.0 kg)
Fuel Capacity	1.18 pts. (.56 l)
Chain Oil Capacity	.7 pts (.33 l)

How many cc is a Stihl 440 Magnum?

MODEL	DISPLACEMENT	BAR LENGTH
MS 440 STIHL Magnum	70.7 cc (4.3 c.i.)	16″ – 32″
MS 460 STIHL Magnum	76.5 cc (4.7 c.i.)	16″ – 32″
MS 460 M Rescue	76.5 cc (4.7 c.i.)	16″ – 24″
MS 660M STIHL Magnum	91.6 cc (5.59 c.i.)	16″ – 36″

Are all Stihl chainsaw spark plugs the same?

Spark plugs are a key part of maintaining a petrol power tool, especially STIHL chainsaws, and you may think that one spark plug is much the same as another. A standard NGK spark plug and NGK spark plugs sold by STIHL may have the same part number stamped on them, but the STIHL NGK spark plug has some key differences.

What is the difference between .325 and 3/8 chain?

The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.

What year was the Stihl 039 made?

Recall Details of Virginia Beach, Va., announced today that it is recalling approximately 50,000 series 1127 chain saws, models 029 and 039 that were manufactured from March 7, 1993 to August 12, 1994.

How many cc is a Stihl 026 pro?

According to Chain Saw Collectors Corner, the Stihl 026 is a 49 cc chain saw introduced in 1993.

How many cc is a Stihl 660 Magnum?

91.6cc
Specification for STIHL MS660 91.6cc 25″ – 63cm Professional Petrol Chainsaw

Engine Type	2-Stroke
ENGINE DISPLACEMENT CC	91.6cc
ENGINE TYPE	2-Stroke – Air Cooled
FUEL TYPE	Unleaded Petrol 50:1 Mix
GUARANTEE COMMERCIAL	1 Year

How many cc is a Stihl 462?

72.2 cc
The STIHL Pro Mark™ Chainsaw Protective Boots with GORE-TEX® provides protection, support and water-resistant breathability. This fully synthetic 2-cycle engine oil is specially suited for high performance chainsaws and power tools….Wrap handle version (R) available.

POWER SOURCE	Gas
DISPLACEMENT	72.2 cc

How many cc’s is a Stihl 461?

76.5
STIHL MS 461 Chain Saw

Technical data	Value
Displacement (cc)	76.5
Power output (kW)	4.5
Weight (kg / lbs) 1)	6.7 / 14.8
Weight (kg / lb)	6.7 / 14.8

How often should you change the spark plug in a chainsaw?

A poorly functioning engine in a Stihl chainsaw can mean more work for the operator and can even be dangerous. Consequently, Stihl recommends replacing the spark plug after every 100 service hours.

What is the horsepower of a Stihl 038?

It had a 1.97-inch bore and 1.34-inch stroke. The slightly more powerful single-cylinder Stihl 038 Magnum was rated at 3.6 kilowatts, or 4.8 U.S. horsepower, from a 4.4-cubic-inch displacement with a 2.04-inch bore and 1.34-inch stroke.

What size guide bars do I need for a Stihl 038?

The Stihl 038 Magnum takes all Stihl guide bars with the Medium 3003 mount, 3/8″ pitch and either .050″ or .063″ gauge. The compatible original bars are listed below. Recommended bar lengths are 16″ to 20″; other lengths greyed out.

Where is the Stihl 038 chainsaw made?

It has operated a manufacturing facility in the United States since 1974, with its principal American chainsaw factory in Virginia Beach, Virginia. The Stihl 038 chainsaw was made in the early 1980s and proved to be popular.

How much horsepower does a Ford 038 s have?

The basic 038 S model’s single-cylinder, two-stroke engine was rated at 3.3 kilowatts, or 4.43 U.S. horsepower, from its 4.07-cubic-inch displacement. It had a 1.97-inch bore and 1.34-inch stroke.