What is Timberflex?

Timberflex is a film forming natural wood finish designed for vertical walls, log homes and fences. The Timberflex system stains and finishes for complete wood protection. On bare wood, it requires at least three coats for proper appearance.

How long does Messmers stain last?

Most likely you would need to reapply every 18 months or so as the Messmers had difficulty achieving UV protection for the two years tested. If you want a beautiful-looking stain that is easy to apply then Messmers would be a great choice.

What is the best deck stain to use in Canada?

Defy’s high performing, low VOC formula makes it a good candidate for the best deck stain for Canada. Another great choice for the best deck stain for Canada is Armstrong Clark Deck Stains. If you prefer oil-based formula rather than water-based, then this stain is ideal.

Is Messmers oil-based?

Messmers Wood Exterior Finish Penetrating oil-based finish, protects, conditions, and enhances the natural beauty of Siding, Decks, Fencing and Outdoor Furniture.

What is the longest lasting deck stain?

Opaque: Sometimes called “solid deck stain,” this product contains the highest percentage of pigment and can protect wood the longest, requiring a recoat every 4 to 5 years. Opaque stain, also the densest, completely hides the wood grain.

Which fence stain lasts the longest?

Which fence stain lasts the longest? Oil-based stains that have a solid opacity last the longest. If properly cared for, these stains can last up to 5 years before the fence needs to be stained again.

Which brand of deck stain is best?

The 9 Best Deck Stains to Protect and Revive Your Deck

• Benjamin Moore Arborcoat Solid Deck Stain.
• Clear Preserva Wood Exterior Wood Stain.
• Russet Behr Premium Exterior Wood Stain.
• Olympic Elite Exterior Wood Stain.
• Valspar Pre-Tinted Semi-Transparent Exterior Stain.
• Cabot Wood Protector Clear Exterior Stain.

How long does it take Messmers stain to dry?

24-48 hours
We wouldn’t recommend it. UV Plus needs at least 24-48 hours to dry in good conditions. If a newly stained deck is rained on, the rain can force the stain up out of the pores of the wood, leaving a blotchy appearance. It’s best to wait until there is no precipitation expected for 48 hours.

How many coats of stain do I need for a fence?

Solid-color stains are identical to regular paint in most situations, and only one coat is needed to protect your fence. Two coats are also required for semi-transparent penetrating stains, with the second coat being applied approximately an hour after the first coat.

Is it better to spray or roll stain on a fence?

I recommend using an airless sprayer when applying wood fence stain. Using only a brush and roller for this project is extremely time-consuming and labor-intensive. You can easily stain an entire fence in one weekend by renting an airless sprayer from your paint store.

What is the longest lasting stain for a deck?

In general, an oil-based deck stain will last the longest, but it also depends on the type of wood, the weather conditions, and how long the deck has gone unprotected before staining.

Is it better to brush or roll stain on a deck?

The agitation and friction caused by a paint brush will cause the wood to absorb more stain. So if you are spraying or rolling the stain, always back-brush it in with a brush while the stain is still wet; you’ll achieve much better penetration in to the wood.

How long does Messmers UV Plus last?

⇓ How long will it last? On vertical, smooth surfaces, UV Plus can be expected to last for 2-3 years, on rough surfaces, 3-4 years and on decks 1-2 years. The time element will vary depending on conditions such as sunlight, weather and direction of exposure.

Can you pressure wash Ipe?

Using a pressure washer isn’t recommended for regular cleaning of Ipe decking. Power washers use high pressure which can damage and roughen the surface of the wood. Use a shop vac to remove debris and dirt from between planks, a soft-bristle broom to sweep it off, or just a regular garden hose.

Will pressure washing remove deck stain?

Pressure washing is a quick way to remove a deck finish, but it requires some care so as not to damage the deck. A pressure setting of 1500 psi should be strong enough to clean away deck stain.

What time of year is best to stain a fence?

Early or late summer are good times to stain a fence. You’ll need a few days of dry, warm weather, both before and after you stain. The boards need to be completely dry. A cloudy day, early in the morning or late in the afternoon are good times to work.