What is ti Uniflash?
What is ti Uniflash?
CCS Uniflash is a standalone tool used to program on-chip flash memory on TI MCUs and on-board flash memory for Sitara processors. Uniflash has a GUI, command line, and scripting interface. CCS Uniflash is available free of charge.
What is SimpleLink WIFI?
The SimpleLink Wi-Fi CC3130 Internet-on-a chip™ device contains an Arm® Cortex®-M3 MCU dedicated to Wi-Fi and internet protocols, to offload networking activities from the host MCU.
What is CC3200 launchpad?
Texas Instruments CC3200-LAUNCHXL CC3200 Launchpad Kit is a development platform for the CC3200 wireless microcontroller, a single-chip programmable MCU with built-in Wi-Fi connectivity. The board features on-board emulation using an FTDI device and includes sensors for a full out-of-the-box experience.
How do I flash with Uniflash?
Choose a program to flash by clicking the Browse button, and you can either load the program or use it to verify against the content on the device. Click on the “Binary” checkbox if you want to load the file as binary, a start address is needed for this. Click on the “+” icon to add and load multiple flash images.
How do I find out what the unknown device is on my WiFi?
The MAC address is listed as Wi-Fi Address….How to identify unknown devices connected to your network
- Tap the Settings app.
- Tap About Phone or About Device.
- Tap Status or Hardware Information.
- Scroll down to see your Wi-Fi MAC address.
How can I see what devices are using my Google WiFi?
With the Google Wifi app
- Open the Google Wifi app .
- Tap Network. Devices. The numbers next to “Devices” represent your total Internet (WAN) traffic to and from your network.
- Tap a specific device and a tab to find additional details. Usage: How much data the device has used over the selected time frame.
Which architecture is used in CC3200?
Created for the Internet of Things (IoT), the SimpleLink CC3200 device is a wireless MCU that integrates a high-performance ARM Cortex-M4 MCU, allowing customers to develop an entire application with a single IC.
How do I identify an unknown device?
Unknown Device in Device Manager
- Open Device Manager.
- Type devmgmt.
- Device Manager opens (Figure 2).
- Right click on the “Unknown Device” and select Properties (Figure 3).
- Select the Details tab.
- The top line should list something like: PCI\VEN_8086&DEV_1916.
Why do I see random devices on my network?
Reasons why you see strange devices on your network If you see strange devices on your network manager, it is likely that your Wi-Fi is protected using a WPA (Wi-Fi Protected Access) protocol.
What is the voltage tolerance level of CC3200 launchpad for analog read pins?
4 CC3200 Power Supply Considerations By using this scheme the CC3200 will utilize the integrated power management subsystem to generate the required voltages to operate the device and the CC3200 will support wide-voltage operations from 2.1 to 3.6 V source.
How do I find hidden drivers?
These are component drivers of the software programs you installed on your computer. To see these hidden drivers, just click on the “View” tab then check the “Show hidden devices” option. After doing this, you should see a new category labeled “Non-Plug and Play Drivers”.
How do I find out what an unknown device is in Device Manager?
What are the unknown devices on my Wi-Fi?
As standard, all routers have a unique Wi-Fi password these days, and it’s virtually impossible to hack. It means your unknown devices are probably gadgets you’ve forgotten about, such as your DVR (maybe a Freeview or Sky box), a smart thermostat, plug or another smart home gadget.
How do I remove an unknown device from my network?
Follow the instructions below to identify and remove any unknown devices connected to your network using Home Network Security….
- Open the Home Network Security app.
- Tap the Menu icon.
- Tap Devices, select the unknown device.
- Deselect “Allow Home Network Access”
How do I control devices connected to my WiFi?
Here’s how:
- Sign in to Smart Home Manager.
- Choose Network, then Connected Devices. Only devices connected to your network will show.
- Select the device you want to view. Then, choose the more option (three dots). From here you can: Edit device details. Add the device to a profile. Block the device from your network.
How do I find an unknown device in Device Manager?
What is a hidden device?
In Device Manager, there are two types of hidden devices in addition to the devices that are displayed: Typical, hidden devices that are not displayed (non-Plug and Play drivers, printers, and so on) -and- Phantom devices that are not connected to the computer.
How do I delete files in Uniflash CC3200?
Uniflash enables the user to delete any user file from the GUI and the serial flash via the GUI using the delete button under each file (located on the top next to the target filename). Figure 13. Deleting File 8 CC3200 Support
How do I make the CC3200 Launchpad work in two modes?
In addition, the CC3200 LaunchPad can be made to work in two modes: functional mode and UART load mode. UART load mode is to be used when flashing the device. This mode is selected by connecting “SOP2”
What are the security parameters for CC3100 CC3200 Uniflash Peer2Peer?
SimpleLink™ Wi-Fi®CC3100, CC3200 UniFlash For Peer 2 Peer security profile, the following parameters are defined: • Profile 4 SSID is set to p2pProfile. • Profile 4 Priority is set to 8. • Profile 4 Bssid Set is set to Disable. • Profile 4 Security Type is set to Peer2Peer.
How do I program a device using Uniflash?
by clicking Operation →Program. Upon pressing the Program button, the Uniflash utility checks for an Update checkbox. If Update is checked, programming to the target device is executed. 10.3.3.3 Generation of Binary Templates Unlike programming that generates the binary templates and programs those to the target device, it is
