What is primary VLAN in HP Procurve?

The primary VLAN is the VLAN the switch uses to run and manage these features and data. In the factory-default configuration, the switch designates the default VLAN (DEFAULT_VLAN) as the primary VLAN. However, to provide more control in your network, you can designate another VLAN as primary.

How do I configure VLAN on HP switch?

Configuring basic VLAN settings

1. Enter system view, use the command: system view.
2. Create VLANs, use the command: vlan { vlan-id1 [ to vlan-id2 ] | all }
3. Enter VLAN view, use the command: vlan vlan-id.
4. Configure a name for the VLAN, use the command: name text.
5. Configure the description of the VLAN, use the command:

How do I create a VLAN on Aruba switch?

Creating and Updating VLANs

1. Navigate to the Configuration > Network > VLANs page.
2. Click Add a VLAN to create a new VLAN.
3. In the VLAN ID field, enter a valid VLAN ID.
4. To add physical ports to the VLAN, select Port.
5. (Optional) Click the Wired AAA Profile drop-down list to assign an AAA profile to a VLAN.

How do I configure my HP Procurve switch?

How to: Configure a HP ProCurve switch

1. Step 1: Connect your serial connection.
2. Step 2: Conenct PuTTY.
3. Step 3: Get the IP address.
4. Step 4: Set time server.
5. Step 5: Set SNMP community info.
6. Step 6: Launch the web GUI.
7. Step 7: Configure basic info.
8. Step 8: Create VLANs.

How do I configure HP ProCurve stack management?

Display the Stack Configuration menu by pressing ïï ï to select Stack Configuration. Configuring Advanced Features 9-15 Configuring Advanced Features HP ProCurve Stack Management Configuring Advanced Features Figure 9-6. The Default Stack Configuration Screen 4. Move the cursor to the Stack State field by pressing ïïï(for Edit).

How do I configure the VLAN for a specific port?

NOTE:You can use these options from the configuration level by beginning the command with vlan , or from the context level of the specific VLAN by just entering the command option. tagged Configures the indicated port as Tagged for the specified VLAN.

What is the default GVRP configuration for the unknown VLAN?

The CLI show gvrpcommand and the menu interface VLAN Support screen show a switch’s current GVRP configuration, including the Unknown VLAN settings. Default: GVRP Enabled (Required for Unknown VLAN operation.)

What VLAN number is the DHCP server connected to?

In the following example, the host is on VLAN 20 and is connected on port number 2 of the switch. The DHCP server, however, is in VLAN 10 and is connected on port 10 of the switch.