What is MEPC resolution?

Resolutions are published in the final report of the Committee meeting during which they were adopted. They may appear as an Annex to the meeting report. Document symbols for resolutions include the resolution number and session information.

What is MEPC means according to IMO?

Marine Environment Protection Committee
The Marine Environment Protection Committee (MEPC) addresses environmental issues under IMO’s remit.

What is MEPC and why it is needed?

Marine Environment Protection Committee (MEPC) 75, 16-20 November (virtual session. The MEPC approved draft new mandatory regulations to cut the carbon intensity of existing ships. This builds on current mandatory energy efficiency requirements to further reduce greenhouse gas emissions from shipping.

What MEPC 74?

The 74th session of the IMO’s Marine Environment Protection Committee (MEPC 74) took place on 13-17 May at IMO headquarters in London, with key environmental subjects on its agenda, aimed at supporting the achievement of the objectives set out in the initial IMO strategy on reduction of greenhouse gas (GHG) emissions …

What is attained EEDI?

The attained EEDI is the actual calculated and verified EEDI value for an individual ship based on the data in the EEDI Technical File. In the following EEDI-value is used synonymously for attained EEDI.

What MEPC resolution a revised garbage management plan on every ship that needs to brought into compliance with?

Resolution MEPC. 220(63) provides the 2012 Guidelines for the development of garbage management plans.

How often does MEPC meet?

The IMO MEPC convenes every nine months over a five-day period to discuss and come to a consensus about the most pressing matters in terms of marine environment protection.

What period of time is the protection and environment committee elected?

The Council is elected by the Assembly for two-year terms beginning after each regular session of the Assembly.

How is EEDI calculated?

Energy Efficiency Design Index (EEDI), formulated for new ships, is an index that estimates grams of CO2 per transport work (g of CO2 per tonne-mile). It can be expressed as the ratio of “environmental cost” divided by “Benefit for Society”.

How can I reduce my EEDI?

Slender vessel. The EEDI thresholds can be met by reducing the hull resistance, which reduces the power required for propulsion. One way to achieve this is to increase hull length, beam or both to reduce the block coefficient, enabling a slenderer design, keeping the vessel’s cargo-carrying capacity unchanged.

What are the 5 categories of garbage?

These are:

• Liquid Waste. Liquid waste includes dirty water, wash water, organic liquids, waste detergents and sometimes rainwater.
• Solid Rubbish. Solid rubbish includes a large variety of items that may be found in households or commercial locations.
• Organic Waste.
• Recyclable Rubbish.
• Hazardous Waste.

What MEPC 77?

The IMO Marine Environment Protection Committee met virtually and in person on 22-26 November 2021 for its 77th session (MEPC 77). At the recent COP261, the IMO was invited to accelerate its goals2 to reduce greenhouse gas (GHG) emissions from shipping, to reach zero emissions by 2050.

Where is IMO located?

London
Headquartered in London, the IMO was created by a convention adopted at the UN Maritime Conference in 1948. The convention came into force on March 17, 1958, after it was ratified by 21 countries—seven of which were required to have at least one million gross tons of shipping. Its current name was adopted in 1982.

How many annexes are there in Solas?

The current SOLAS Convention includes Articles setting out general obligations, amendment procedure and so on, followed by an Annex divided into 14 Chapters.

What is EEDI and EEXI?

EEXI is the sister to EEDI, Energy Efficiency Design Index, which has been in force since 2013. These indexes measure the same in practice; however, EEDI is applied to new ships while EEXI applies to existing vessels.

What is EEDI formula?

The general formula for EEDI calculation is indicated below: EEDI=CO2 Emissions/Transport Work (1) Broadly then, EEDI is mainly an amount of CO2 gas emissions from new ships divided by its cargo capacity carrying. Formula 1 can be expressed following that: EDDI=Engine Power.SFC.CF/dwt.

What are the 3 types of garbage?

Sources of Waste

• Industrial Waste. These are the wastes created in factories and industries.
• Commercial Waste. Commercial wastes are produced in schools, colleges, shops, and offices.
• Domestic Waste.
• Agricultural Waste.

What is MEPC 62/24 annex 18?

MEPC 62/24/Add.1 Annex 18, page 1 I:\\MEPC\\62\\24-Add-1.doc ANNEX 18 STATEMENT BY THE DELEGATION OF SWEDEN ON THE RO-RO SEGMENT AND THE PROPOSAL FOR A RESOLUTION ON THE FUTURE WORK OF THE ORGANIZATION PERTAINING TO MARPOL ANNEX VI

What is the assessment for approval in principle in MEPC 62?

MEPC 62/24/Add.1 Annex 25, page 8 I:\\MEPC\\62\\24-Add-1.doc Assessment for approval in principle 8.2 The application for approval in principle should be assessed by the Committee to ascertain whether: .1 the application for approval in principle is complete, of sufficient quality, and in accordance with this Procedure;

Are there any MEPC 65 and MEPC 63?

No. Item MEPC 63 February/ March 2012 MEPC 64 October 2012 MEPC 65 2013 12 Status of conventions X X X 13 Harmful anti-fouling systems for ships

What does Sweden support in MEPC 62/6/7 Annex 4?

With this background, Sweden strongly supports the adoption of a resolution on the future work of the organization pertaining to MARPOL Annex VI, as proposed in MEPC 62/6/7 annex 4 that includes firm commitments to develop, with a view to adopt, a set of requirements for ships defined in regulations 2.32 to 2.36.