What is an antique stove board?

Stove boards were used under wood burning stoves to protect the floor and to prevent sparks or coals from starting a fire. I wish I could figure out how old this particular stove board is.

What is a Type 2 stove board?

Type 2: Thermal Protection Type 2 Thermal Protection is used for wood stoves that have not been tested to sit directly on a combustible floor. Thermal floor protection types are manufactured in the form of a stove board. The stove board safely allows a wood stove to sit on it.

What is stove board made of?

Constructed of embossed printed steel over 1/2″ thick, specially formulated fiber board to provide non-combustible thermal and ember protection. It may also be used as a wall shield to protect walls from intense heat. Stove Board wall spacers and connector kits sold separately.

What is a wood stove board?

Imperial stove boards protect walls and floors from the intense heat, hot coals, ashes and soot that wood stoves can produce. Allows stove to be installed closer to wall.

Can stove boards be cut?

The particleboard should be cut so that it supports the metal frame of the pad on all sizes. Can I have a hole cut in my hearth pad? Yes. We can cut a hole in the hearth pad or wall pad according to the specifications your stove dealer provides, showing the size and placement of the hole.

What is a Type 1 hearth pad?

Type 1 – Steel Hearth Pads Most require only protection from falling embers. But some stoves produce enough heat directed down and forward that a Type 1 – Ember Protector won’t stop the heat from passing through to the floor beneath the stove. View Type 1 Hearth Pads.

What size is a stove board?

28 x 32″
IMPERIAL GROUP USA Stove Board

How do you attach a stove board to the wall?

Locate one anchor in each corner. Do not place any anchors directly behind heating unit. Place wall Stove Board in position and drill 1/4” holes at marked locations around perimeter of shield, drilling at least 1” into the wall at the same time. Remove Stove Board and insert wall anchors into each hole.

What do you put on floor under wood stove?

Cinderblock Fireproof Mats You can use cinderblocks to create fireproof mats for wood stoves. A layer of heat-resistant material over the backer board helps raise the stove and distribute heat, which protects the floor.

What can be used as stove board?

You can use cinderblocks to create fireproof mats for wood stoves. A layer of heat-resistant material over the backer board helps raise the stove and distribute heat, which protects the floor.

Is cement board a good heat shield?

Safe wood stove installations require a heat shield that will prevent heat from the wood stove from creating a fire hazard in the building materials that form the exterior wall. Hardi cement board is an inexpensive solution that will form the foundation of an effective heat shield for any application.

How do you install a stove board?

Can you use cement board under wood stove?

How far does a hearth have to stick out?

So how far should a fireplace hearth come out? InterNACHI recommends that for fireplaces that have an opening of 6 square feet (0.56 square meters) or smaller, a hearth should extend at least 16 inches (406mm) out into the room from the opening, and by at least 8 inches (203mm) away from the sides.

How thick does a hearth pad need to be for a wood stove?

The standard for a hearth pad thickness is a minimum of 3/8″ or 8mm, and this can be thicker depending on the noncombustible material used, something that is important and not always stated on stove labels is that the hearth pad should be a continuous surface.

How far does a wood stove have to be from cement board?

A combustible floor must be protected by a non-combustible material (like tile, concrete board, or certified to UL-1618 or as defined by local codes) extending beneath the heater and a minimum of 6″ from each side and minimum 16″ from the front face of the stove and minimum 6″ (or the rear clearance to combustibles …

Is cement board good behind a wood stove?