What is a 11/28 cassette?

Standard Setup. Currently, the most common gearing setup on new road bikes is a 50/34 chainset with an 11-28 cassette. This means that the big and small chainring have 50 and 34 teeth, respectively, and the cassette’s smallest cog has 11 teeth and its largest cog has 28 teeth.

Are all 11 speed cassettes compatible?

When SRAM entered the road groupset market in 2006, it decided to adopt Shimano’s specifications for its chains and cassettes. As a result, the chains and cassettes from the two brands have always been completely interchangeable for any given type of transmission (e.g. 11-speed).

Are all Shimano cassettes compatible?

All Shimano and SRAM cassettes up to 10 speed are broadly compatible. They all use Shimano’s Hyperglide II freehub body spline pattern. Cassettes with the same number of sprockets have the same sprocket spacing, sprocket width and overall width.

Can a 11 speed cassette fit on a 10 speed hub?

These cassettes are pre-machined and will fit directly onto 10 speed freehub bodies and are available in 11-25, 11-28, and 11-32t. However, if you already have an 11 speed cassette that you wish would fit other wheels*, Lasco Concept will machine it for you.

What cassette do pro cyclists use?

Pros often use a 55×11-tooth high gear for time trials. On flat or rolling stages they might have 53/39T chainrings with an 11-21T cassette. In moderate mountains they switch to a large cog of 23T or 25T. These days, they’ve joined the big-gear revolution like many recreational riders.

Which cassette ratio is best for climbing?

Based on your anticipated speed and minimum tolerable cadence, are the gear ratios on your bike sufficient? A common setup on a road bike adapted for climbing is a compact road crankset with 50-34 chainrings and an 11-32 cassette, which gives a lowest gear of 34:32 or a ratio of 1.06:1.

What size cassette is best for hill climbing?

For hill climbing and mountainous terrain, we recommend a road cassette such as the 11-32T SRAM Red 22 XG1190 11 Speed Cassette (A2), or the 11-34T Shimano Ultegra R8000 11 Speed Cassette.

Can you use a 10 speed cassette on an 11 speed bike?

Luckily, many common and not-so-common wheelsets, as long as they’re at least 10-speed, can be upgraded to 11-speed by purchasing a new cassette body. The body is the part that attaches to the center of the hub and drives the wheel and bike when you pedal.

Can you put a 10 speed cassette on a 11 speed bike?

Will an 11 speed Shimano cassette fit on a 10 speed hub?

No, 11speed mountain cassettes are slightly wider than 10/9/8 speed ones, so newer Shimano free hubs come with a small spacer (only 1 or 2 mm) so they’re still compatible with older drive trains.