What is 50.9 fuser error?

If you are seeing the message 50.9 Fuser Error on your HP LaserJet P4014, P4015, P4015 series printer, you have either a failing fuser or the wrong model fuser installed in your printer. (The fuser is the consumable part in your printer which heats up and bonds toner to the paper.

What causes fuser error in HP printer?

This error might display if the fuser temperature becomes too hot. Follow these steps to turn off the printer and allow the fuser to cool before printing again. Press the Power button to turn off the printer. Disconnect the power cord from the rear of the printer.

How do I fix my HP laser fuser error?

Simple Steps to Correct 50.2 Fuser Error on HP LaserJet Printers

1. Turn your printer off and unplug it.
2. Remove the fuser and reinstall.
3. Gently rock the fuser back and forth to make sure is secure.
4. Plug the printer directly into a wall socket.
5. Turn the printer back on.

How do you fix a 50.9 fuser error?

Yes, it is commonly a Fuser related issue.

1. Verify the fuser is installed correctly and fully seated.
2. Turn off the printer, remove and reseat the fuser.
3. if same issue, replace the Fuser unit.
4. If no go, then need to replace the DC controller PCA.

What does 50.2 fuser error mean?

50.2 error indicates that the printer is not heating up fast enough. This can be caused by a bad heating element in the fuser but can also be caused when the printer does not have adequate power due to overloaded circuits or being plugged into a power strip or surge bar that limits current flow.

What is fuser in HP printer?

Printer fuser is a component of a laser printer that uses heat and pressure to bond toner to the paper. It is critical to the performance of the printer and requires replacement after a period of pages. It is considered consumable item by most printer manufactures.

Can a fuser be repaired?

Fuser Units The coating wears off and causes the toner to not fuse properly. There are replacement rollers and sleeves on the market that you can replace and turn a non-functional fuser into a good working one. Rebuilding fuser assemblies is not a new thing.

How do you clear a fuser in jam?

A sheet of paper has torn while you were trying to clear a jam from the fuser.

1. Turn the product off.
2. Rotate the product so the rear is facing you.
3. Disconnect the power cord.
4. Open the rear output bin.
5. Remove the rear output bin.
6. If paper is visible, remove it.
7. Remove the jammed paper.

How do I Unjam my HP LaserJet m402dn?

Clear paper jams in Tray 2

1. Remove the tray from the printer.
2. Remove the paper from the tray, and discard any damaged paper.
3. Verify that the rear paper guide is adjusted to the indentation for the correct paper size.
4. Load the paper into the tray.
5. Reinsert and close the tray.
6. Press the front-door-release button.