What does sh mean on a Prodigy P2 brake controller?

Expert Reply: The SH code on the Prodigy Brake Controller, # 90885, indicates that while idle, the brake controller is sensing a short in the brake wire. Tekonsha states that some test lights or non-Tekonsha testers can cause this problem.

How do you test a prodigy P2 brake controller?

To test the brake controller, sever the blue wire a couple inches from the back of your controller. Then use a circuit tester such as # 40376 to test the end of the blue wire coming out of the controller.

How does the Prodigy P2 work?

The Prodigy P2 electric brake controller supplies power to your tow vehicle’s brakes proportionally. This means that your trailer brakes at the same time and with the same strength as your vehicle – even in reverse gear.

How do I connect to Prodigy P2?

Insérer la commande de frein Prodigy P2. 3. Brancher le connecteur. 1. Le devant de la commande de frein Prodigy P2 doit être horizontal (+ _ 20 degrés), voir ci-après.

Is there a manual for Prodigy P2 90885?

I’ve linked the manual for the Prodigy P2 # 90885 . It is the pdf so you should be able to open it without issue. If you still have issues then you may need to download a different pdf viewer. I’ve also attached the product page and we have so many videos that will walk you through all the features and installation. 55537 Towing a Trailer?

What type of sensor does The Prodigy P2 have?

The Prodigy P2 employs an inertial sensor. It Braking”. engaged. engaged. 3. onds. 4. reverse. It will apply the appropriate brake voltage

How does The Prodigy P2 brake work?

The Prodigy P2 employs an inertial sensor. It Braking”. engaged. engaged. 3. onds. 4. reverse. It will apply the appropriate brake voltage hypothetical power output. This value is set using based on deceleration. the power knob. Range is 0.0 to 13 volts. This is an indication of voltage output to electric brakes. 5. 6. turers recommendation.