What does it mean to C notch a truck frame?

A C-Notch sounds just like it is, a C shaped chunk is taken out of the frame just above the axle tube so that you can get more suspension travel. The notch is filled with a C shaped piece of steel and a boxing plate is usually installed on the inside of the frame.

How low can you drop a C10?

Just spindles can drop you two inches, but if you elect to get aftermarket springs as well it’s possible to go down as low as 5 inches.

How much does a flip kit lower a truck?

A flip kit is designed to move the rear axle of your truck from being underneath the leaf spring pack to being on top of the leaf spring pack. This will generally give about six inches of lowering to the back of your truck.

Does notching a frame weaken it?

The half circle notch is slightly stronger than stock (about 10%) and gives about 8″ more travel. The Step Notch is slightly weaker than stock (about 10%) and gives about 8″ more travel. Pipe Notch. This yields 2″ more travel than stock and is as strong as a stock frame.

Can you do a 4/6 drop without C notch?

4/6 rides better than 2/4 and is easier to install. It does require a c notch but the frame is actually stronger because of it.

How much does a Chevy C10 cost?

We visited the used car market searching for the C10 and found quite a few models coming at about $10,000. However, what we found confusing is that some of these classic pickup trucks come with a price tag as high as $55,000.

Can you Unlift a truck?

Be aware that when you remove a suspension lift kit, your truck will need to be realigned after the removal process is completely done. Most people do not retain their stock section of frame which was removed, AND although possible, it would not be recommended to weld it in place for safety reasons.

Why do you need AC notch?

Super Moderator. A c-notch is required when you start to get annoyed by the axle slapping the frame. It’s starts to get annoying when you drop it 3″ or more.