Liverpoololympia.com

Just clear tips for every day

Blog

Is there 1GB DDR3?

Is there 1GB DDR3?

A-Tech 1GB DDR3 1333MHz Desktop Memory Module (1 x 1GB) PC3-10600 Non-ECC Unbuffered DIMM 240-Pin 1Rx8 1.5V Single Rank Computer RAM Upgrade Stick.

What PC3 means?

The PC3-xxxx designates the particular RAM’s speed rating and means that the memory certified as able to run at that bus speed. So DDR3 RAM PC3-1333 runs at 1333 MHz while the PC3-1066 runs at 1066 MHz.

What does PC3 12800u mean?

Kingston Memory DDR3-1600 memory has a module classification of PC3-12800, which effectively means the peak data rate of the module is 12.8GB/sec (see table). That’s about a 17% improvement on memory bandwidth over DDR3-1333.

Is DDR3 and PC3 the same?

The number after DDR/PC and before the hyphen refers to the generation: DDR2 is PC2, DDR3 is PC3, DDR4 is PC4.

What does pc3 10600 mean?

And for what it’s worth, the 10600 is another designation for DDR3 1333 DRAM, PC3 indicates DDR3 and the 10600 indicates the theoretical number of M/Ts (roughly MegaBytes per second)

Can I install DDR3 RAM in DDR4 slot?

DDR4 is not backward-compatible with DDR3 so a DDR4 DIMM will not fit on a DDR3 DIMM slot.

Can you mix PC3 10600 with PC3 12800?

Regarding the downsampling of the speed,yes you are absolutely correct. When PC3 12800 (1600MHz) installed with PC3 10600 (1333 Mhz) , it works at 1333Mhz. Moreover downsampling of speed does not cause a major harm.

Is PC3 compatible with DDR3?

Nope, PC3 = DDR3. You just have to match the PC3 number to the DDR3 frequencies. See en.wikipedia.org/wiki/DDR3_SDRAM#JEDEC_standard_modules. You should get either 12800 (1600) or 10666 (1333).

What does PC3-10600 mean?

Can I use PC3-10600 instead of PC3-12800?

The speed is a up to speed. PC3-12800 works just fine as PC3-10600 speeds.

Can I put 1600mhz RAM in a 1333mhz slot?

In short, yes 1600mhz ram will work at 1333mhz just fine.

What is the difference between PC3 10600 and PC3-12800?

The 12800 refers to a data rate of 1600MT/s while the 10600 is 1333MT/s so the faster 4GB module will be underclocked to run at the slower 1333 rate for uniformity which should not cause any issues, as long as the timings also match, especially with performance since 1333MT/s DDR3 is plenty fast for average everyday …

What’s the difference between 10600 and 12800 RAM?

10600 is 1333 ddr3 and 12800 is 1600 ddr3. 1600 is a bit faster.

Will any DDR3 RAM work?

You can use any DDR3 RAM on your PC as long as you have room for extra sticks on your motherboard and you don’t exceed the motherboard’s RAM cap. The optimal setup is to add an identical stick to what you already have. If you’re having trouble finding one, you can buy a similar stick.

Related Posts