Is Dyson DC33 discontinued?
Is Dyson DC33 discontinued?
The DC33 uses a single motor for the suction and to drive the brushroll via a mechanical clutch as on the DC04, DC07 and DC14. This unit has been discontinued as of July 2013. No replacement model has been announced.
Why is my Dyson making a high pitched noise?
The Dyson high pitched noise is the sound of the clutch engaging. The clutch protects the belts. The problem is that if the clutch stays engaged too long, you might burn up the clutch. Replacing the clutch requires a lot of disassembly, so I’d start with removing debris from the belt and replacing the filters first.
What year was the Dyson DC33 made?
2010
Upright
| Model name | Image | Launch year |
|---|---|---|
| DC25 | “no image” | 2008 |
| DC27 | no image | 2009 |
| DC28 | no image | 2009 |
| DC33 | no image | 2010 |
Why does my vacuum sound like it’s screaming?
A high-pitched noise from a vacuum cleaner usually indicates an airflow obstruction. When most vacuum cleaners are in operation, the device will emit a steady, low-pitched noise. This noise may change in tone or volume as dirt or debris is suctioned into the vacuum cleaner but remains fairly constant during use.
Why is my vacuum suddenly loud?
If your vacuum has suddenly become very loud, check the filter, as it may be dirty. When the filters on a vacuum become excessively dirty, the vacuum may start running louder because it is working hard to create suction. If your filters are dirty, your vacuum is likely not suctioning appropriately, either.
Why does my Dyson make a high pitch noise?
If your Dyson vacuum is making a high-pitched noise, it could be one of a few issues. First, empty the dust bin and make sure there are no blockages. You may also want to remove and clean the brushbar. If the noise remains, you may have an issue with your vacuum motor.
How do you fix a whistling vacuum?
If your vacuum cleaner whistles, this is usually a sign that your device can’t suck in sufficient air. Often, it’s the dust container or bag that’s full. Check these first and exchange them if necessary. If that’s not the case, it could be that the device is blocked.
What is the part number for a Dyson vacuum cleaner clutch?
Dyson genuine part number – 900252-04. A full replacement clutch unit and accompanying drive belts. The part required if your Brush roll/Cleaner head has stopped spinning or does not spin as well as it did.
What kind of screwdriver do I need for a Dyson dc-33?
The Dyson DC-33 does require a Torx screwdriver to get the housing off to access the old clutch assembly to forwarn all of you. You will need a Torx T15 screwdriver (about 5-6 inches in length for a third deeper screw) which I did not have but picked up one at my local Ace Hardware for about 6 bucks locally.
Are Dyson clutch belts any good?
The Dyson Genuine Replacement Clutch Assembly provided seems to be an OEM part because it fits and functions to Dyson specifications. The assembly itself is well manufactured without so much as a loose screw. The belt seems to be solid, pliable rubber with no cracks or wear. 5/5 stars for performance and value.
