Is ATF 4 the same as Dexron 3?

Moreover, this Valvoline ATF is essentially a version of the old Dexron III and Mercon ATFs. Since 1998, Chrysler has been using a synthetic ATF, either ATF+4 or ATF+5, which Chrysler specifically says is not compatible with either Dexron or Mercon.

Is ATF and Dexron 3 the same?

ATF Dexron-III is an automatic transmission fluid formulated to meet the requirements of the General Motors Specifications GM 6297M for a Dexron®III Fluid and Ford Mercon® for Ford transmission.

Can you mix ATF 4 and Dexron VI?

MaxLife® ATF, ATF +4 and DEXRON® VI are all synthetic transmission fluids. Is it OK to mix synthetic ATF with a conventional and/or synthetic blend ATF? Yes. Synthetic ATF and conventional fluids are 100 percent compatible with each other.

What transmission fluid is equivalent to ATF 4?

AMSOIL Multi-Vehicle ATF is a qualified replacement for ATF+4.

What is the difference between ATF and DEXRON?

DEXRON is the trade name for a group of technical specifications of automatic transmission fluid (ATF) created by General Motors (GM).

Is ATF +4 synthetic?

Valvoline ATF +4 is the full-synthetic automatic transmission fluid that has been uniquely engineered to meet and exceed the requirements of (FCA) Fiat Chrysler automatic transmissions and is officially licensed and approved for all ATF +4 applications including Chrysler, Dodge and Ram.

What color is ATF +4?

Red
Property

Property
Color, Visual	Red
Flash Point, Cleveland Open Cup, °C, ASTM D92	200 ( 392)
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445	7.5
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445	34.4

Is ATF+4 full synthetic?

Is all ATF 4 transmission fluid synthetic?

ATF +4 is specified to be a fully synthetic fluid, so this is all you need.

What is ATF 4 power steering fluid?

Mobil ATF+4 is specially formulated to ensure optimal performance in Chrysler automatic transmissions. Its unique additive package provides the proper frictional properties, excellent low-temperature fluidity and dependable wear protection required in applications where a Chrysler MS-9602 type fluid is recommended.

Is ATF the same as DEXRON?

What happens if you put the wrong type of transmission fluid in your car?

Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission. Mistakenly adding motor oil or brake fluid can also destroy your transmission.

Does changing transmission fluid help shifting?

Though changing transmission fluid can’t fix mechanical problems, it does make for smoother shifts and can extend the life of your transmission. And even when manufacturers recommend fluid change intervals of 150,000 miles under normal conditions, it may be a good idea to change it more frequently.

Is ATF 4 the same as power steering fluid?

A lot of people ask, “Is power steering fluid the same as transmission fluid?” While ATF and power steering fluid are both hydraulic fluids, ATF features different modifiers and detergents that are specifically designed to remove dirt and grease from the transmission system.

Can you mix ATF 4 and power steering fluid?

Yes, ATF+4® is the correct fluid to use for your transmission and power steering.

Is ATF +4 a synthetic?

What is the viscosity of ATF 4?

Property

Property
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445	7.5
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445	34.4
Pour Point, °C, ASTM D97	-50 (-58)
Viscosity Index, ASTM D2270	194

What is the difference between Dextron fluid and ATF 3?

Dexron-III and Dexron-VI are both under the same trade name for a group of technical specifications of Automatic Transmission Fluid (ATF) created by General Motors (GM). This series of oil is made with less reactive, more stable hydrocracked oil base that is very less prone to make contact with the heat or friction.

Can I use Dexron 6 instead of Dexron 3?

Your vehicle calls for Dexron 3. Dexron 6 is backwards compatible, so you’re okay there, but it’s significantly more expensive. Leave the Dexron 6 in there. It is not causing any problems. However, I’m not sure why you put in the slick 50. I don’t think the slick 50 is doing any harm. In fact, I don’t think it’s doing anything at all.

What weight is Dexron 3?

Dexron VI is of a slightly lower viscosity when new compared to the prior Dexron fluids (a maximum of 6.4 cSt at 100 °C for Dexron VI and 7.5 cSt for Dexron III), but the allowed viscosity loss from shearing of the ATF during use is lower for Dexron VI, resulting in the same lowest allowed final viscosity for both Dexron III and VI (5.5 cSt

Is Dextron 3 discontinued?

Only one version of Dexron-III was ever marketed after it hit the market in 1993, and it was replaced by Dexron-VI in 2005. Some replacements for Dexron-III may be available on the market today, but these products are not officially approved by the General Motors Company.