How much horsepower does a 385 stroker have?
How much horsepower does a 385 stroker have?
506 hp
See all 26 photos With the 750-cfm carb, 35-degrees of timing, and fresh oil, our 385ci belted out 506 hp and 495 lb-ft of torque.
Can a 383 stroker make 600hp?
It can’t be done. You just can’t make a lot of power with cheap cast-iron heads. Certainly you can’t make 600 hp out of a 383 with them. And for sure you can’t do it without a bunch of compression.
How much HP can a SBC 383 handle?
That combo would probably make around 465 hp and nearly 500 lb-ft, but at less rpm. But never mind that. The point here is 502 lb-ft at 4,700 rpm and 500-plus horsepower from 5,700-6,200 rpm….Hot Rod’s Proven Recipe For A Simple Chevy 383 That Knocks Down 500 HP And 500 LB-FT.
| True 383 Power | ||
|---|---|---|
| RPM | LB-FT | HP |
| 6,200 | 425 | 502 |
How much horsepower can you get out of a SBC?
With a stock block, using after market crank, rods, pistons, bolts, heads, etc., you could expect a small block 350 to make upwards of 450 HP and for it to reliably handle upwards of 550 – 600 HP, and a big block with the same aftermarket components to make power in the 500 to 600 HP area, and be able to handle upwards …
How much HP does a Whipple supercharger add?
That depends really, Whipple’s supercharger kits add from 300hp to the Mustang GT. How much power they are capable of adding depends on the rest of the build but putting a 20psi pulley on the right engine, with the right fuel system, the right exhaust and the right tune will produce well over 1200hp!
How much HP can a 383 make?
The 383 stroker engines have been reported to achieve 330 horsepower with 410 foot-pounds of Torque, 395 horsepower with 410 foot-pounds of Torque and 395 horsepower with 410 foot-pounds of Torque.
Will a poweradder add 600 hp to a 383?
600 HP not going to happen in a 11:1 383 without a poweradder.You could raise compression to 13:1,but it will not be streetable and the valvetrain will need constant maintenance (e.g. checking valve springs and lifters on a regular basis). that will be a tough goal to hit with a 383. Go BB if it was me or power adder.
How much HP can a 350 make on pump gas?
Well, I just pulled out my 350, granted the heads are beyond that budget, but it makes 530hp on pump gas, just a couple under 550hp with the crankcase vacuum pump hooked; .035″ over 350 with an older set of modified tour heads. 10.4:1 compression, decent size roller cam. -Dan Milwaukee WI. That would be super easy with no cam or compression limits.
Can you build a 600HP naturally aspirated small block?
New Washington, IN Build a 600hp naturally aspirated small block! here is the challange. Build a Natuarlly aspirated small block chevy, that will produce 600hp at the flywheel. Rules.
