How many watt seconds is a Nikon SB 910?

In a post above someone estimates the output of an SB-800 at 75 watt-seconds. Since the duration at full power is 1/880 of a second (according to the specs in the manual), that would make the total output of one SB-800 flash at about . 085 of a watt….Latest buying guides.

Is SB 700 high speed sync?

Using the high speed sync mode with your Nikon DSLR (D7000 series and above) and compatibile Speedlights (SB-700, SB-5000 and some other speedlights such as the SB-900 range) will enable you to synchronise the flash to shutter speeds all the way up to your camera’s highest shutter speed.

How many watt seconds is a canon 600EX?

Think of the 600EX as having a total power output of 75-ish watt seconds, compared to the 640 watt seconds of the Einstein.

Does the Nikon SB 800 have high speed sync?

AUTO FP High-Speed Sync The new SB-800 can automatically set itself to FP (Focal Plane) flash mode should camera shutter speed rise above the standard flash sync speed for Balanced Fill Flash in bright light with high shutter speeds or fast aperture lenses.

How many watts do I need for video lighting?

For a basic three-point lighting setup, you will need to choose the wattage for your key, fill, and backlight (if you have one). Key lights are your strongest lights and should generally be around 500-2000 watts. The fill light used to fill in the shadows of your subject should be less powerful, 250-500 watts.

What is release mode Nikon?

Release mode controls what happens when the shutter is released. Single frame. The camera takes one photo each time the shutter-release button is pressed all the way down. Continuous low speed. The camera takes photos at a slow rate while the shutter-release button is pressed all the way down.

What is TTL mode flash?

TTL stands for Through the Lens. Consider this flash mode the equivalent of that automatic mode on your mirrorless or digital camera. In contrast, a strobe without TTL can’t make automatic adjustments. Instead, it relies entirely on input from the photographer.

What does TTL BL stand for?

TTL-BL (BL=back lit) attempts to balance the light of your subject with a bright background. In this mode, the camera and flash meters are coupled and work together.

Is the Nikon sb910 worth the price difference from the SB700?

Re: Nikon SB 910 vs. SB700 worth the price difference? I do not have the SB910 but IMO the SB 700 looks very cheaply made when compared with my SB800s (I have three of them). I guess SB910 is a par with SB800 regarding to the feel, so I would not think two times to go for it.

Should I buy the sb900/910?

Of potential consideration is the fact that, in addition to higher output, the SB900/910 have a power port allowing for the use of an external battery pack (e.g. Quantum Turbo3). Depending upon the extent of the need, IMHO, the ability to avoid having to swap out AA cells during an event can be invaluable.

What are the dimensions of the SBSB 910?

SB 910 = 34 m/111.5 ft. (at ISO 100, 35mm zoom head position, in FX format, standard illumination pattern, 20°C/68°F) to 48 m/157.5 ft. (at ISO 200, 35mm zoom head position, in FX format, standard illumination pattern, 20°C/68°F) Be the first to leave a review.

What is the focal length of SBSB 700?

SB 700 = 28 m/92 ft. (at ISO 100, 35mm zoom head position, in FX format, standard illumination pattern, 20°C/68°F) to 39 m/128 ft. (at ISO 200, 35mm zoom head position, in FX format, standard illumination pattern, 20°C/68°F)