How do you hook up a DVD player to DirecTV box?

Plug one end of the cable into the audio and video out ports on the DVD player. Plug the other end into the audio and video in ports on the back of the DirecTV receiver.

How do I connect my DVD recorder to my satellite box and TV?

Connect a coax cable from the wall to the RF In on the DVD Recorder. Connect a coax cable from the DVD Recorder RF Out to the RF In on the cable/satellite set-top-box. Connect a coax cable from the cable/satellite set-top-box RF Out to the RF In on the television.

How do I hook up my TV to my cable box and receiver?

Connect the HDMI cable into the HDMI OUT jack on the back of the cable box or satellite receiver. 3. Connect the other end of the HDMI cable to the HDMI IN jack on the back of the television. IMPORTANT: If the TV has an HDMI jack, no further steps are required.

What input should TV be on for Dish Network?

Your TV must be set to the correct input or channel to enjoy DISH service—usually HDMI1 and channel 3 or 4. If your screen is black, blue, or snowy, your TV may be set to wrong input or channel.

How do I hook up my DVD player to my Samsung TV and cable box?

Use an HDMI cable to get the best quality signal from your DVD player to the Samsung TV screen.

1. Locate the HDMI input on the back of the Samsung TV.
2. Insert one end of the HDMI cable into the “HDMI IN” port.
3. Plug the other end of the HDMI cable into the “HDMI OUT” port on your DVD player.

How do I hook up my directv box without HDMI?

If you wish to hook up a DIRECTV Box to TV without HDMI, you can use RCA composite cables, component cables, coaxial cables, HDMI converters, and even optical audio cables to get the job done.

What channel does your TV need to be on for DVD player?

DVD players will display on one of the Input or Auxiliary channels. They will not show up on Channel 3 or 4 like some VCRs. Some TVs will label the Input channels based on the type of input, such as “HDMI”, “AV”, and “COMPONENT.” Refer back to Method one if you have a question about which input type you are using.

Why does my TV say no signal when watching DVD?

Ensure the TV and DVD player are set to utilize the same type of video signal, either progressive or interlaced . IMPORTANT: Some televisions may not be able to display a progressive signal. If not, the DVD player should be set to output an interlaced signal.

Can I connect satellite dish directly to TV?

You cannot connect your satellite dish to your TV. The signals from satellites are in a different format since they come from such a far place. You need a satellite TV receiver to demodulate the signals from your dish. So, it is a coaxial cord to the set-top box and set-top box HDMI cable to your TV.

How do I connect my DVD player to my cable box with HDMI?

Attach your cable to your DVD player. Plug the HDMI or s-video cable into the appropriately labeled port on the back of the DVD player. If you’re using an s-video cable, you’ll also need to plug the red and white RCA cables into the red and white ports on the back of the DVD player.

What channel does the TV need to be on for DVD player?

How to connect your DirecTV receiver to your TV?

– Plug one end of the coaxial cable into the port on the back of your receiver. – Plug the other end of the cable into the port on your TV. – Turn on your TV and receiver. – Set your TV channel to 3 or 4 with your TV remote (not your DIRECTV remote). These 2 channels receive the DIRECTV service signal.

How do you set up a direct TV box?

Plug one end of the HDMI cable into your device and the other end into your TV.

Want a wired internet connection?

Insert the power cord into the back of the device and then plug it into a wall outlet.

Turn on your TV and change the input to the correct one using the Input or Source buttons on your TV remote.

How to connect a Comcast cable box to a TV?

Avoid purchasing used cable boxes. All Comcast cable boxes are property of Comcast,and none are authorized for sale by other people.

Check your connections. A weak connection to your wall coax outlet or to the box itself could be causing your activation issues.

Schedule a service visit.

Activate your new equipment quickly.

How to set up a DirecTV box?

Connect the coaxial cable to the back of the DirecTV receiver.

Make the connection between the receiver and the television.

Power on the DirecTV receiver and the television.

If you are unable to access the satellite signal on your receiver after setting it up with the TV,you will need to complete the satellite dish setup