How do I set up SMB scanning?

1. • Click File->New->Folder.
2. • Name the folder Scans.
3. • Right click Scans and select properties.
4. • Click on the Sharing tab.
5. • Click Share.
6. • In the File Sharing window, type Everyone and click Add.
7. • Change the permission level to Read/Write.
8. • Click Share.

What is SMB for scanning?

Scanning documents using your Xerox multifunction device (MFD) to a server uses the Microsoft Server Message Block (SMB) protocol. There are several versions of the SMB protocol. The SMB protocol used for scanning is negotiated between your server and Xerox device.

How do I set my scanner to destination?

Registering Scan Destinations

1. Start the Web browser, and access the machine by entering its IP address.
2. Click [One Touch Button] or [Scan Destination].
3. From the [Add New Type] list, select [E-mail], [FTP] or [Folder].
4. Register information as necessary.
5. Enter the administrator password if required.
6. Click [Submit].

Does Scan email use SMB?

To send scan data to a Macintosh computer, use Scan to FTP. You can use Scan to SMB on Mac OS 10.6 or earlier (Mac OS 10.3 or later) because it supports SMB protocol.

How do I setup my Xerox printer to scan to my computer?

At the top of the Xerox Easy Printer Manager window, select Advanced Setting or Machine Settings. Click Scan to PC Settings….Scan to PC

1. Scan using Easy Printer Manager on your computer.
2. Scan using the Scan to PC icon on the printer’s control panel.
3. Scan using the Scan to Network icon on the printer’s control panel.

How do I scan using Samba Xerox?

How To Setup SMB Scanning

1. Enable Workflow Scanning.
2. Create and Configure a Shared Folder and Scan User to be Used With Server Message Block (SMB) Workflow Scanning.
3. Test the Scan to SMB User Account From a Computer With the Microsoft Windows OS.

How do I get my Xerox printer to scan to my computer?

To Scan to Desktop:

1. Load the original document on the document glass or into the duplex automatic document feeder.
2. At the printer control panel, press the Home button.
3. Touch Scan to Desktop.
4. To select a destination, touch the computer address.
5. To begin the scan, press Scan.

What is SMB in printer settings?

The SMB printing function is a function used to print data by directly specifying this machine on the computer. This machine is shared using the SMB (Server Message Block) protocol. If the WINS server is installed to resolve the name, register it.

How do I scan directly into a folder?

Advanced Mode

1. Load your document.
2. Click the Scan tab.
3. Click File.
4. The Scan Settings dialog box appears. You can configure the scan settings in this dialog box. If you want to preview and configure the scanned image, check PreScan box.
5. Click Scan. The image will be saved in the folder you have chosen.

How do I scan a Xerox machine to my computer?

How do I find the SMB path?

Locating the SMB folder manually

1. Press [Change] under “Path”.
2. Enter the path where the folder is located. For example: if the name of the destination computer is “User”, and the folder name is “Share”, the path will be \\User\Share.
3. Press [OK]. If the format of the entered path is not correct, a message appears.

How do I Scan to a folder on my Xerox printer?

Scan to Network (SMB Folder or FTP Server)

1. At the printer control panel, press the Home button.
2. Load your original documents:
3. Touch Scan to Network.
4. To select a contact from the list, touch Contact required.
5. Adjust the scan settings as needed:
6. Touch Scan.

Why is my Xerox printer not scanning?

Check that the scanner is configured correctly. Check that the printer cable is connected properly. Make sure that the printer cable is not defective. Switch the cable with a known good cable.

How do I scan to a folder on my Xerox printer?

How do I find my SMB printer?

Windows Printing enables Server Message Block (SMB), the file and printer sharing protocol built into Windows….Configure Windows Printing (SMB)

1. From Configure, choose Network > Services > Windows Printing (SMB).
2. Select Enable Windows Printing (SMB).

Does printer sharing use SMB?

The print client uses the SMB protocol family to submit the file containing the print job data to a printer share on the print server.

How do I Scan a document into a shared folder?

Right-click the “Scan” folder and select [Properties].

1. Click [Advanced Sharing] in the [Sharing] tab.
2. Select the check box for [Share this folder] and click [Permissions].
3. In [Group or user names], select [Everyone] and select the [Allow] checkbox in [Change].
4. Configure the destination settings.

How do I Scan a document on a network drive?

Scanning to a Network Folder or FTP Server

1. Place your original on the product for scanning.
2. Press the home button, if necessary.
3. Select Scan.
4. Select Network Folder/FTP.
5. Select Scan Settings.
6. Select File Format to choose the file format for your scan.

How do I enable scan to SMB on an AltaLink device?

Access the Embedded Web Server (EWS) as the System Administrator. Configure a File Repository for Scan to SMB on the AltaLink device from the Embedded Web Server. Perform a Destination Test on the File Repository to Verify the Configuration.

How do I configure xeroxscans to share files?

Type 445 into the Port field. Enter the name of the previously created share folder (example: scans) into the Share field. Select the Device radio button under Login Credentials to Access the Destination. Enter the previously created username (example: xeroxscans) into the Login Name field.

Why won’t my Xerox multifunction device connect to my computer?

If all configuration is correct and your setup is still not successful you might have issue with closed ports within your Windows Firewall Settings, Anti-Virus software that is blocking the communication between your computer and Xerox multifunction device. If playback doesn’t begin shortly, try restarting your device.

How do I enable SMB scanning on my Device?

Access the Control Panel as the System Administrator. Configure the Network Address Manually at the Device Control Panel Touch Screen. Print a Configuration Report From the Control Panel. Create a New User for Use with SMB Scanning.