How do I reset my Bose 321 remote?

Reset the universal remote.

1. On the remote control, press and hold a source button (i.e., TV or CBL-SAT) until all six source buttons glow, then release. The button that was held remains glowing.
2. On the number keypad, enter 981. The source buttons flash to confirm.
3. Reprogram the remote.

How do you program a Bose 321 remote?

To program your remote: For TVs, simultaneously press and hold the Program button and the TV On/Off button for three seconds until all the source buttons glow. For cable or satellite boxes, simultaneously press and hold the Program button and the Guide button for three seconds until all the source buttons glow.

How do I reprogram my Bose remote?

To program your remote:

1. Power on your system.
2. On the system console, press the Setup button.
3. On the remote control, scroll down to select [Source] setup, then press the OK button.
4. Select a programming mode:
5. Follow the on-screen instructions to complete programming.

Why is my Bose remote control not working?

Try new batteries in the remote. In case the battery or batteries in your remote are low or have no power, replace them. Alkaline batteries are recommended over rechargeable batteries, which might output lower voltage.

How do you clear codes on Bose remote?

Clearing a specific code

1. On the remote control, press and hold the source button of the desired source for about three seconds until all source buttons glow.
2. Press 0-1-4-0: The Source buttons blink rapidly, then turn off.

How do I unpair my Bose universal remote?

If you no longer want your Bose remote to operate other devices, follow these instructions.

1. In the Bose Music app, tap the Settings icon. in the upper-right corner.
2. In the Universal Remote section: Select TV to deprogram control of your TV then tap Remove at the bottom of the screen.

How do I pair my Bose remote to the console?

To pair your remote control with your system console:

1. Power on your system.
2. On the system console, press and hold the Power button for 10 seconds.
3. On remote control, simultaneously press and hold the Glow button on the back and the OK button on the front for five seconds.

How do I get my Bose soundbar to work with my TV remote?

On the remote with which you want to control your Bose system, press and hold the Volume Up button until your speaker plays a tone: If the TV light on your speaker blinks amber twice then glows white, it learned the command.

How do I test my Bose remote?

An easy way to test your remote is to place it next to an portable AM radio. Tune the radio so it is off station with the volume turned up, then press any button on the remote. If the remote is sending out a good signal you will here a pulsing noise from the radio.

How do I program my Bose Soundbar remote to my Samsung TV?

Control your soundbar using your Samsung TV remote

1. Use the TV remote to navigate to Settings, select Sound, and then select Sound Output on your Samsung TV.
2. Select your Samsung soundbar, and then select Close. Now you can use your TV remote to adjust volume and mute the soundbar.

How do I know if my Bose remote is working?

Look at the top edge of the remote through a digital camera (i.e. a smartphone camera), then press a button on the remote. If you do not see a flash through the camera viewfinder when a button is pressed, the remote is not sending any signal*.

How do I reset my Bose Lifestyle remote?

The fix was quick and easy. Press and hold the light button on the back of the remote and then, while holding the light button, press and hold the OK on the front of the remote until the spinning wheel disappears. If this solution doesn’t work, unplug the power from the console, wait 30 seconds and then plug back in.

How do I sync my soundbar to my TV remote?

How to Control a Soundbar With a TV Remote

1. Find the optical or HDMI ARC connection on both the soundbar and TV.
2. Connect an optical or HDMI cable to each.
3. Turn the TV and soundbar on.
4. Test and Troubleshoot Any Connection Issues.
5. Adjust and Optimize Your Sound.

How do I program my Bose soundbar remote to my Samsung TV?

Can you reset Bose remote?

If your remote has the Bose logo in the top center: On the remote control, press and hold the Setup button for about three seconds until all five source buttons glow. Press 9-8-1: The source buttons blink rapidly, then turn off.