How do I connect my Kessil AP700 to WiFi?
How do I connect my Kessil AP700 to WiFi?
Connect Direct to AP700
- Follow the animation instructions on the app and press “Next”.
- Exit the app and access phone “Settings > WiFi” to connect to Kessil WiFi SSID.
- Create a password for the selected lamp, then press next.
- If only connecting one AP700, press “Done” to finish the setup.
How do I factory reset my Kessil AP700?
Added factory reset function – Unwanted programs or settings of light can now be completely cleared (press “down” and “+” then disconnect unit from power). Power outage recovery has been improved. Light will now save program status every 5 minutes (once an hour previously).
How do you clean a Kessil AP700?
If the lens becomes contaminated with water, dust or other particles, unplug the unit and clean the lens with isopropyl alcohol. Wet a cotton swab or napkin with the isopropyl alcohol and gently wipe the surface of the lens. The light can be turned on once the lens is fully dry.
What is Kessil logic?
A80 Tuna Sun Nano LED Light …the tank. Kessil Logic After many years of R&D, Kessil Logic can be found on all of Kessil’s LED lights. The A80 allows you to fine tune the overall color and intensity that the light puts out while keeping a spectrum that will be optimal for coral health and growth.
How do I reset my ruijie AP?
Factory reset Reyee devices through press the reset button more than 5 seconds, it will reboot and factory reset. The second method is through Ruijie Cloud Restore option： Step1: Click the device SN on the RuijieCloud interface to enter the configuration page. Step2: Network→Reboot& Reset.
How do I reset my AP 7522?
A – From the web browser:
- Log into the controller and go to Dashboard.
- In menu tree, Expand System.
- Expand the RF domain.
- Select the AP you’d like to reset.
- From drop down to the right of the AP name select “Factory Reset”
- Select the reset option from the list (see note)
- Click on the Factory Reset button.
How long do Kessil Lights last?
about 5-7 years
Our lights have a normal life expectancy of 35,000 hours, about 5-7 years for most customers. There are many factors that can reduce the life expectancy of the light such as the environment (humidity, moisture, salt creep, and temperature) as well as the maintenance of the light.
How many Kessil lights do I need?
How many Kessil A360X do I need over my tank? LPS and Soft Coral: A single A360X will cover a 24″ x 24″ area and provide PAR that is suitable for LPS and soft coral (75 -150 PAR). SPS Coral: You will want to use two A360X fixtures for every 24″ x 24″ area to provide PAR that is suitable for SPS corals (200 – 350 PAR).
How do I reset my AP to factory settings?
To reset a n Instant AP, perform the following steps:
- Turn off the Instant AP.
- Press and hold the reset knob using a small and narrow object such as a paperclip.
- Turn on the Instant AP without releasing the reset knob. The power LED.
- Release the reset knob. The Instant AP reboots with the factory default settings.
How do I change my ruijie WIFI password?
Choose Advance > System Settings > Change Password to change your password.
How do I reboot my access point?
Unplug the access point’s power cable and wait for 30 seconds then plug it back in. Wait for the access point’s lights to appear solid. NOTE: Make sure to press and hold the Reset button properly. The lights on the access point should be blinking while you are holding the Reset button.
How do I manually restart AP?
To restart an AP, expand the Access Points section, click the AP’s box on the left side, then click Restart. Note: Restarting the Unleashed Master AP will prompt you to click OK to confirm, as the network will experience a brief service interruption during the restart process.
Are Kessil lights good?
Kessil lights are by far one of the easiest lighting systems to control and have success with. The simple control system and pre-set lighting spectrums let you adjust the spectrum of the light correctly for your tank while providing the proper light mixture of colors in the light for healthy coral growth and color.
How Reset UniFi AP AC LR?
The Reset button serves two functions for the UniFi AP:
- Restart Press and release the Reset button quickly.
- Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.
How factory reset UniFi AP AC Pro?
Reset This button serves two functions for the UniFi AP-PRO: • Restart Press and release the Reset button quickly. Restore to Factory Default Settings Press and hold the Reset button for more then five seconds.
How do I log into my ruijie router?
The default IP is 192.168. 1.2 , and then connect your PC under Router LAN port. Finally, you can web login the Router with the IP 192.168. 1.1. The default username and password is admin admin.
How do I reset my ruijie WIFI?
