Can a mixing valve be cleaned?

Whenever hard water is heated, limescale deposits form which can have an adverse effect on moving parts and piping in general. That, and other forms of dirt and corrosion, can cause any mixing valve performance to suffer if allowed to get out of hand. The good news is our valves can easily be cleaned.

What is the difference between a mixing valve and a tempering valve?

A tempering valve is accurate to around 3℃ +/-, while a thermostatic mixing valve can keep the water to 1℃ +/- and responds faster than a tempering valve to changes in incoming water temperature.

What temperature should a mixing valve be set at?

120F
These valves should never be set to exceed a maximum temperature of 49C (120F). (Watts recommends the maximum temperature of 43C (110F) for shower and bathing fixtures.)

What temperature should a tempering valve be set at?

When your plumber installs a tempering valve in your hot water system, he needs to necessarily set the minimum required tank temperature to 60-degree. However, he may set the tap water temperature or 45-50-degree depending on the needs of the household.

Can a shower mixing valve get clogged?

If you’re experiencing reduced water flow during your shower, a clogged valve may be the cause. Over time, mineral deposits can build up and prevent your fixture from operating correctly.

Does mixing valve reduce water pressure?

When the toilet flushes, it draws cold water from your shower. The mixing valve senses a drop in cold water pressure. It responds by restricting hot water pressure.

Can I adjust my tempering valve?

CAN YOU ADJUST A TEMPERING VALVE? The answer is Yes. A tempering valve can be adjusted by setting the desired temperature with the adjuster on the tempering valve.

How often should a tempering valve be replaced?

All hot water tempering valves should be checked annually and replaced every 5 years.