Are High Lift mower blades better?

Low-lift mower blades perform well on dry, shorter grasses, while high lift blades work better in ALL conditions. High-lift blades have deeper curves on the ends, which create enough suction to circulate and expel the clippings. The higher air flow also helps prevent clogging when mowing tall or wet grass.

What’s the difference between mulching blades and high lift blades?

Standard blades are also referred to as “2-in-1” (discharging & bagging) or “high-lift” blades (because they are designed to create a higher-lifting airflow). Mulching blades generally have a more curved style surface and frequently include extra cutting surfaces along the blade edges.

What is a high sail mower blade?

A high sail blade is the best choice for collecting clippings, because it creates the lift and vacuum needed to get the clippings into the bag or hopper. Keep in mind that a high sail blade requires more horsepower to operate, which can take away from the machine’s power and increase fuel consumption.

What size blade does a John Deere?

John Deere Standard Mower Blade (38-inch cut)

Specification
Length	19.575 IN
Width	2.520 IN
Thickness	0.204 IN
Wing Height	0.787 IN

Can mower blades be too sharp?

In fact, an edge that is that sharp has the tendency to roll over, which can cause blades to get nicked and chipped. Additionally, lawn mower blades that are too sharp get duller, faster resulting in the need to sharpen more frequently and a shorter blade life.

What are toothed mower blades for?

By USA Mower Blades The blade teeth do not have a cutting edge but are used to create extra lift, propelling grass clippings high into the mower deck. The angle of the teeth is designed to force the grass clipping back toward the cutting edge.

What size blades do I need for a 42 inch deck?

AYP Blade fits 42″ Cut Decks, needs two blades. Size: Length: 21″, Center Hole: 5/8″Star, Width-thickness: 225-149. Replaces # 127843, 138498, 131323, 138791 & 532127843. {Blades are sold individually} If you purchase 10 of these blades you get FREE SHIPPING.

How long are blades on a 46 inch mower deck?

MaxPower’s 561739B 2-blade set fits many 46-in cut Craftsman, Husqvarna and Poulan mowers. This set replaces OEM numbers 405380, 532-405380, PP21011. Also fits Craftsman CMXGZAM110146 and CMXGZAM110147. Each blade measures 23-in long x 2-3/4-in wide with a 5 point star center hole.

What are the toughest mower blades?

The E6 blades are the widest, thickest blades offered by USA Mower Blades. E6 blades are 3-inches wide and 0.250-inches thick. These extra-thick blades are heavy-duty and will tackle any lawn with ease. Designed for commercial applications, E6 blades offer unmatched durability and longevity.

Why are my new mower blades not sharp?

The main reason that some people believe that new blades should be sharpened before use is due to the powder-coated paint finish that is applied to most replacement blades by the manufacturer. This finish is particularly thick around the blade’s cutting edge and to the touch, it can make it feel like it’s dull.

How often should mower blades be changed?

annually
For the average homeowner, a good rule of thumb is to replace your mower blades annually. Sharpening mower blades on a regular basis will prolong the life of your blades. Be sure to take protective measures if you sharpen your blades at home – wear protective gear and disconnect the spark plugs.

Are Gator blades better than mulching blades?

Unlike other mulching blades that push the grass down, the high lift on a gator blade draws the grass up which in turn gives you a clean, even cut. This high lift also makes using Gator Blades in bagging operations a great choice.

How do I know what mower blade to buy?

The easiest way to find replacement lawn mower blades is with the OEM number. The OEM number is the numerical part number of the blade assigned by the manufacturer. In most cases, just typing this number with the manufacturer name into a search engine or online store will be enough to bring up some promising results.

How do I know what size lawn mower blade I need?

There are three major measurements to consider: length, width, and center hole. Other important measurements to note are thickness and distance between outer holes. Also take note of the center hole type and measurement. LENGTH: Length is measured diagonally from one tip of the blade to the opposite tip of the blade.

Are thicker mower blades better?

Blades that are too sharp become blunt faster than fairly dull ones. Thus, you should choose thicker blades over thinner ones to avoid frequent sharpening. They should be sharp enough to do a clean cut with great ease and not too dull to leave freshly cut grass looking unsightly.

Do new John Deere mower blades need sharpening?

No, it’s not necessary to sharpen brand new lawn mower blades. You can simply remove your new blade from its packaging, remove the old blade carefully from your mower, and then attach the new one.

How often should you replace lawn mower blades?

What kind of engine does a John Deere lx255 have?

The John Deere LX255 was produced from 1999 to 2001. It came equipped with a hydrostatic drive transmission, 42″ or 48″ Mower Deck and 15hp Kawasaki Engine. Regular Maintenance should be performed on the LX255 every 50 hours and should include Spark Plug, Air Filter, Oil Filter with 2qts oil and sharpen or replace mower blades.

Where do I find the serial number on a John Deere lx255?

John Deere Lawn Tractor Parts Model LX255 Model LX255 The 13-digit product identification number (serial number) (A) is located on the right-hand side frame, just below engine compartment. Click here for 42C Mower Deck Parts for LX255 Click here for 42M Mower Deck Parts for LX255 Click here for Rear Bagger Parts for LX255

What are the different types of John Deere lawn tractor parts?

These John Deere Lawn Tractor Parts may include: Tune Up Kit, Spark Plug, Mower Blades, Traction Drive Belt, Transmission Belt, Mower Drive Belt, Battery, and Air Filters. If you need help finding John Deere Lawn Tractor Parts Search Using Weingartz Illustrated Diagrams to view an illustrated diagram or call us at 1-855-669-7278.