Are Warwick basses worth the money?
Are Warwick basses worth the money?
The only not-so-great thing about Warwick bass guitars is that they cost quite a lot. Even their entry-level basses cost a couple hundred dollars. Knowing this, if you really want one of their axes, you should consider saving up in advance. In terms of value, these bass guitars are extremely good for the money.
Should a bass have high action?
A bass with high action requires more effort and can create problems for younger players who don’t have enough strength to get a good tone. Another common problem is low action, where the strings are practically touching the fretboard without any help from the player.
Are Warwick basses still made?
Warwick basses were originally a premium brand offering a small range of models built from high quality and exotic tonewoods. The company also produces valve and FET amplifiers, speaker cabinets, bass guitar strings, and is the division of the Framus trademark….Warwick (company)
| Type | Private |
|---|---|
| Website | warwick.de |
Who uses Warwick basses?
Bootsy Collins. Warwick is one of the biggest names in the bass world, and across the following pages, we profile five of the company’s most iconic signature artists and their instruments.
What wood does Warwick use?
Wenge (Millettia Laurentii): Warwick pioneered the use of wenge as a neck and fingerboard wood. It is very strong, stable and dense. A wenge or ovangkol neck with a wenge fingerboard is a prime ingredient in the “Warwick sound”. Wenge is a dark brown wood with blackish streaks.
How do I adjust the truss rod on my bass?
To adjust the action, turn the screw in the truss rod to change the curvature of the neck. If the gap is too large, insert the Allen wrench or Phillips screwdriver into the screw (located either on the headstock or at the other end of the neck) and then tighten the truss rod by turning the screw clockwise.
How do you change the truss rod on a bass guitar?
Replacing the Truss Rod in a Bass Guitar
- Step 1: Remove the Fretboard.
- Step 2: Cut the Slots for the Reinforcing Rods.
- Step 3: Glue in the Reinforcing Rods.
- Step 4: Add a Shim to the Existing Truss Rod Slot.
- Step 5: Add Indexing Pins to the Neck to Align the Fretboard.
- Step 6: Install the Truss Rod and Glue the Fretboard On.
How high should the action be on a bass?
A good rule of thumb is that you can get away with about 1/64 of an inch lower action on the highest-pitched string than what you’ve set your lowest pitched string to.
How high should bass strings be?
Measuring at the 12th fret (as in the photo), the action height should be 2.6 mm for Steel String Acoustic guitar, 1.8 for electric, 2.0mm for bass and 3mm for a Classical.
Who plays Warwick basses?
Signature Series In 2019, Warwick produced 13 models of signature bass. Present and past models have included those for Jack Bruce (Cream), Bootsy Collins, T.M. Stevens, Robert Trujillo (Metallica), Jonas Hellborg, Adam Clayton (U2), John Entwistle (The Who) and Jäcki Reznicek (Silly).
How much do Warwick basses cost?
Compare with similar items
| This item Warwick Rockbass Streamer Basic 4-String Fretless Active Natural High Polish | Ibanez SR500E Electric Bass Guitar (Brown Mahogany) | |
|---|---|---|
| Price | $94999 | $69999 |
| Sold By | Guitar Audio | GearNuts |
| Body Material | Alder | IBSR500EBM |
| Fretboard Material Type | Ebony | IBSR500EBM |
When did Warwick start making basses?
Founded in 1982 by Hans Peter Wilfer, he designed three core bass body shapes.
Which way do you adjust the truss rod?
Turn your truss rod adjuster nut clockwise and you will add more pressure onto the neck pulling it into back bow. Turn it anti-clockwise and you will loosen the truss rod allowing the strings to pull the neck into a forward bow. Some forward bow is needed for sure.
How do I know if my truss rod needs adjusting?
If you hear buzzing, or if the fret fails to sound a note, then your guitar neck has bowed upward toward the strings. This means that you need to loosen the truss rod.
What is normal bass action?
A good bass setup is all about compromise, and as a guitar technician, you always have to find the best balance between playability and the most amount of fret buzz that you’re willing to tolerate. Some common action measurements on a bass guitar are around 5/64″ up to about 7/64″.
How to adjust the action on a bass guitar?
How to Adjust Action on a Bass. 1 Part 1. Tune the Bass. 1. Tune the bass as you normally play it. Use an electronic tuner to achieve accurate tuning. This will assure that the strings 2 Part 2. 3 Part 3. 4 Part 4.
Can I lower the action at the bridge of my guitar?
If your instrument plays fine at the first position, but the action is too high above the twelfth fret, then just lowering the action at the bridge might not be enough. It could make the action too low at the head. You would then have to raise the string height at the nut. this would require a new nut, as the slots cut into the current nut are too.
How do you fix too much bow on a bass guitar?
Too much bow or too little bow means you need to adjust the truss rod on the bottom of the headstock. Once you’ve done this, raise or lower the bridge or the individual string saddles on the bridge with an Allen wrench. Test your action adjustments by playing your bass at each fret.
What should the bass and treble side of the action be set to?
Conventionally, the bass side of the action should be set to 7/64”, while the treble side is set to 5/64”. Thanks! Include your email address to get a message when this question is answered. Video . By using this service, some information may be shared with YouTube. Do not force the truss rod nut.
