How much algaecide do I add?

Pool Algaecide: Initial Dosage: 12 oz. per 10000 gallons. Maintenance Dosage: 3 oz. per 10000 gallons, weekly.

How do I know how much algaecide to add to my pool?

Use the biguanide algaecide for your pool, measuring 16 ounces for every 10,000 gallons of water.

What happens if you put too much algaecide?

The presence of too much algaecide can lead to a foamy pool water. Small bubbles will begin to be produced as the water is pushed through the return jet and back into the pool. Do not confuse these bubbles and foam with another common problem, which is air in your pool lines.

How do I add liquid algaecide to my pool?

Pour the algaecide dose into the water, depositing it in several areas around the pool. Your swimming pool pump should be running at this time to help circulate the algaecide. Wait about 30 minutes before allowing anyone to swim after the algaecide application.

Should I run the filter after adding algaecide?

Add a dose of algaecide, bring your chlorine level high by shocking, and run the filter continuously until the problem clears. The next day you should vacuum up the dead algae and backwash your filter. Algae thrives in hot weather and in pools with low or no chlorine.

How often should you put algaecide in your pool?

a weekly basis
Algaecide should be added to your pool water on a weekly basis. Preventing algae is the key to fun in your pool. Algaecides act as a backup to your normal sanitization program and prevent algae from starting and growing in the pool. Algaecide should be added after every shock treatment.

How do I add algaecide to my pool?

Can too much algaecide make pool cloudy?

If you add algaecide, keep in mind that some algaecide contains copper, which can actually make a pool cloudy. If the cloudiness persists 24 hours after shocking, then it’s possible that you used a poor-quality chlorine shock.

How soon can you swim after algaecide?

It is best to wait 30 minutes after adding it to your pool. We recommend waiting at least 15 minutes to swim after adding algaecide to your swimming pool. Most algaecides are perfectly safe to swim with. It is not recommended to swim with flocculent in your pool as it will reduce its effectiveness.

Will algaecide make my pool cloudy?

How long do you have to wait to swim after putting algaecide in the pool?

How often should I put algaecide in my pool?

Do you run pump when using algaecide?

What time of day do you put algaecide in pool?

If your pool water is still green, wait 24 hours and then redo the steps from Day 1. In the morning, add Oxidizer to your pool water. In the evening, add your liquid algaecide; we recommend concentrated 40% Algaecide.

Do you shock pool before algaecide?

While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.

Can you swim after adding algaecide?

How long does it take for algaecide to clear a pool?

ALGAE TREATMENT – 4 DAYS TO SPARKLING WATER If your water has been struck by Algae, we have developed an efficient solution that will take only 4 days to fix!

Is it safe to swim in a pool with algaecide?