How do I fix error 5011 on my Canon printer?

If your Canon Printer is showing 5011 error it is mostly because the cartridge of the printer is stuck….1. Perform a Power Cycle

1. Power off the printer again.
2. Open the printer’s lid for the scanner. Turn on the printer again keeping the lid open.
3. Close the lid after the printer restarts. Check for any improvements.

How do you clear a paper jam on a Canon Pixma printer?

Solution

1. Turn off the printer and unplug it.
2. Retract the paper output tray and open the cover. Important.
3. Check if jammed paper is under FINE cartridge holder.
4. Hold jammed paper firmly in both hands.
5. Slowly pull out paper, so as not to tear it.
6. Make sure all jammed paper is removed.
7. Close cover.

How do you clean canon encoder strips?

Clean the encoder film

1. Moisten a cotton swab with the isopropyl alcohol or window cleaner. Don’t use any other detergents.
2. Gently move the cotton swab over the surface of the film, until the entire film is transparent and clear.
3. Close the paper output cover, plug in the power cord, and turn the machine back ON.

What does support code 5100 mean on a Canon printer?

Paper is jammed or there is an object inside the printer. Inspect the printer to confirm there is no remaining paper from a paper jam and that there are no foreign objects inside your machine.

Why is my Canon printer saying paper jam but there is no jammed paper?

But for this specific issue, where the printer is reporting a paper jam even though no paper seems to be jammed, I’ve found that 90% of the time there’s one thing to blame: the guides on the paper tray. Any time your printer halts because of a paper jam, check the tray that holds the paper.

What do I do when my printer says paper jam but there is none?

Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source.

Can I use alcohol to clean encoder strip?

The first step in cleaning the encoder strip is to release the print carriage and power the printer off at the control panel. After that, mix 1:1, distilled water and isopropyl alcohol. CAUTION: Do NOT use tap water or straight alcohol – either can permanently damage the encoder strip.

Where is the encoder strip in a Canon printer?

The encoder film is a clear, thin film 1/4″ high that sits horizontally across the inside of the printer. The strip contains thin black vertical lines that help it determine the printer’s carriage position.

How do I reset my Canon printer paper jam?

How do you fix a false paper jam?

Reset the printer, which might clear a false paper jam error, and then try to print again.

1. With the printer turned on, disconnect the power cord from the printer.
2. Unplug the power cord from the power source.
3. Wait 60 seconds.
4. Reconnect the power cord to a wall outlet and to the printer. note: