How much does a Gear Vendors overdrive cost?

At about 2600 dollars (depending on model) the GEAR VENDORS is not the cheapest way for you to get overdrive but is by far the best. A Gear Vendors will handle more horsepower, deliver bigger performance gains, give you guaranteed trouble-free performance, and install easier than any other overdrive available.

How much horsepower can Gear Vendors overdrive handle?

The Ultimate in Horsepower Handling and Performance. GEAR VENDORS provides overdrive product to racing cars and trucks up to 2000hp and trucks towing heavy RV’s up to 25,000lbs gcvw.

How do Gear Vendors work on overdrive?

Once you shift into Second gear, you can switch it out of overdrive and wait until you reach the top of Second gear and switch into Second gear overdrive. Then once you shift into Third gear, once again switch it out of overdrive and wait until you reach the top of Third gear and switch it again back into overdrive.

What oil to use in a Gear Vendors overdrive?

GM synthetic fluid
Gear Vendors highly recommends using GM synthetic fluid to prevent overly harsh shifts, but you can use regular 90W fluid if you don’t mind the bump.

Can you add overdrive to a C6 transmission?

Adding overdrive to a C6 is physically impossible, but the 4R100 can donate its forward planetary gear set for shorter first and second gear ratios. This creates a “wide-ratio” C6.

Is there a TH400 with overdrive?

Some refer to the 4L80E as the TH400 with an overdrive ratio, as much of the internals are interchangeable. TCI has a complete line of 4L80E transmissions in the Street Fighter and Super Street Fighter trim levels.

Can you tow with a Gear Vendors overdrive?

Factory overdrive + Gear Vendors is perfect for when the truck is not towing, but when you are towing the aerodynamics require horsepower.

How much does a Gear Vendors overdrive weigh?

32-46 lbs
As you can see above the overdrive is very compact (roughly the dimensions of a standard coffee can) and looks very factory once installed. SPECIFICATIONS: Net Weight 32-46 lbs depending on application hardware.

How much oil does a gear vendor hold?

Fluid capacity 28zo/flat sump or 48oz/deep sump. Fluid type – GM#1052271 petroleum based or GM#12346190 synthetic.

How much HP can a C6 transmission handle?

According to Kokonis the company uses stock input shafts for applications up to 1,000 hp. Pushing past that limit requires the CK Performance billet input shaft. Other standard modifications are stronger C6 planetary carriers.

Is a 700R4 better than a TH400?

The 700R4 is an improved and upgraded model compared to its predecessors-TH350 and TH400. The GM THM700R4 is a 4-speed automatic-shift overdrive transmission installed longitudinally (front to back) over vehicle chasses.

Can a TH350 have overdrive?

But the TH350 and TH400 three-speed versions (and their two-speed Powerglide cousin) fall short when it comes to highway cruising. The reason for this is the conspicuous lack of an overdrive gear.

Can you add overdrive to C4?

Overdrive is another popular upgrade with a late-model AOD automatic or a five/six-speed manual. But you can also upgrade to a Gear Vendors overdrive for your C4/C6 automatic or four-speed Top Loader transmission.

How much do Gear Vendors weigh?

Net Weight 32-46 lbs depending on application hardware. Mechanically direct, hydraulically overdriven DeNormanville design. Long Life Epicyclic planetary.

How much HP will a stock C6 handle?

1,000 hp
According to Kokonis the company uses stock input shafts for applications up to 1,000 hp. Pushing past that limit requires the CK Performance billet input shaft. Other standard modifications are stronger C6 planetary carriers.

How much HP can a Turbo 400 handle?

About 400-450 HP/TQ is the limit on the stock TH400. With ONE almost free modification and some minor valve body calibration changes, 800 HP on an otherwise stock TH400 is not a problem if it’s assembled well (good endplay, etc), and the 34 element sprag is a wise addition above 450 HP or any drag usage.

What are Gear Vendors overdrive kits?

Related to fuel economy, performance, and emissions — GEAR VENDORS overdrive kits include electronics that keep the vehicle in the optimum performing gear.

Why choose Gear Vendors Autodrive electronic?

Our standard AutoDrive electronic however do include several great features for a combination of street/strip use including AutoLaunch for both manuals and automatics. GEAR VENDORS makes the highest quality, most expensive overdrive you can buy. We back that with customer service and warranties you do not commonly find in business today.

Do all cars have an overdrive gear?

Only the import cars with manual transmissions had an overdrive gear. Through the years we have worked with Ford, GM, and Chrysler and our products have come factory on everything from one of Americas fastest production cars (GM’s TwinTurbo Callaway Corvette) to Americas largest RV manufacturer (Fleetwood Motorhomes).

Where can I get Overdrive for my car or truck?

Get Expert advice about your vehicle. Call us at 800-999-9555 GEAR VENDORS provides overdrive product to racing cars and trucks up to 2000hp and trucks towing heavy RV’s up to 25,000lbs gcvw. Whether you are trying to move a couple tons up a steep incline or moving just a couple thousand down the track — the fastest way is with the right gearing.