Is the 4R70W and AOD the same?
Is the 4R70W and AOD the same?
The AODE/4R70W valve body is different from, and not interchangeable with, the AOD. It lacks the throttle valve of the AOD. The system pressure programming and shift-points are computer controlled instead of being mechanically modulated. The manual shifter valve has a bolt-on detent to lock shift positions.
Are all Ford AOD transmissions the same?
The AOD (automatic overdrive) is a four-speed automatic transmission, with the 4th gear as overdrive. Introduced in 1980, it was Ford’s first four-speed automatic overdrive transmission. The gearset design is based on the Ford “X” automatic transmissions used during the 1950s, ’60s, and ’70s….Ford AOD transmission.
| AOD | |
|---|---|
| Overview | |
| Successor | 6R |
What does 4R70W stand for?
wide gear ratio
This means you don’t have to compromise between streetability and performance. Although unable to in its factory configuration, it is possible to modify the valve body to achieve converter clutch lockup in 1st gear. 4R70W (wide gear ratio) offers all of the above with lower 1st and 2nd gear to aid acceleration.
What does AOD stand for transmission?
They called this replacement transmission the AOD, meaning automatic overdrive, and it became Ford’s first automatic four-speed offering.
Is the 4R70W better than an AOD?
4R70W TRANSMISSIONS PROS: More acceleration off throttle than the AOD with 1st Gear. No TV Cable uses Computer to control shift points. Can handle naturally up to 500 HP with Mods 650+HP.
How much HP can an AOD handle?
450 hp
Because of this odd power flow, Lentech’s Len Bertrand tells us a stock AOD can handle 450 hp, at best, and will always be hard on 3/OD clutch packs.
How much HP can a 4R70W handle?
There you have it… the PerformaBuilt Level 3 Invincible series 4R70W Ford performance transmission. These units are capable of power up to 1000 RWHP and come with a 6-month warranty without converter and a 1-year warranty when purchased with a converter.
Is the Ford AOD transmission any good?
The AOD transmission is endlessly reliable when used on stock vehicles. But if a driver decides to make the engine faster, the transmission could end up failing, especially past 450 horsepower. The internals simply were not built to withstand the much stronger forces that come from the upgraded powerplant.
How much HP can a AOD handle?
How strong is a Ford AOD transmission?
The bulletproof nature of the Ford AOD transmission can be unraveled just by knowing the right buttons to push. When that has been put in place, you can boost its performance from about 400 hp to as high as 1,200 hp which makes for excellent speed while racing.
Is the Ford 4R70W a good transmission?
The 4R70W is a good transmission, but it has its pros and cons. Let’s look over some of its best qualities, and some of its faults and issues. For one, it has a much better and improved overdrive band.
Are 4R70W good?
Is the 4R70W a good transmission?
What did the 4R70W come in?
Ford’s AOD transmission begat the AODE, which then spawned the 4R70W. This transmission was used for 10 years: 1993 to 2003 in the F-150 pickup, 1997 to 2004 in the Expedition, 1996 to 2001 in the Explorer, along with the Mustang, Thunderbird, Cougar, Crown Victoria, and many more Ford applications.
Is 4R70W a AODE?
The AODE/4R70W is a 4-speed, rear-drive automatic overdrive with electronic control, hence the AODE designation. Ford went to electronic control not only for engine/transmission cohesion, but also improved shift quality by removing the short-comings of mechanical control.
How much HP can 4R70W Hold?
A rebuild with good & extra clutches will result in 600-700 crank hp. Some more easy mods and you can build them to hold well over 1000hp.
What is a lentech reverse/third valvebody?
A manual shift, fixed pressure valvebody is standard fare.Incorporated into this valvebody is Lentech’s famous Reverse/Third technology for huge torque capacity. It is recommended for wild performance vehicles that see limited street usage.
Is a lentech valve body worth it?
This valve body is a MUST for AOD’s needing to withstand 600+ hp. Lentech’s valvebodies have become a hallmark in the performance overdrive marketplace. This is evidenced by the demand for and use of them by major francise retailers and competing transmission companies alike!
Is there a transbrake valve body for the AODE transmission?
In response to demand from enthusiasts and racers, Lentech has developed a Transbrake valve body for the AODE/4R70W transmission. Installing this valve body in your transmission will add reliability as a result of its custom fixed line pressure.
What kind of transmission does lentech make?
Overview: Features the 1-2-3/4 shift pattern originated by Lentech, compression engine braking in manual second, electric overdrive delete (or lockout) and billet input shaft. This transmission is pressure modulated, meaning the throttle pressure cable controls the mainline pressure with the opening and closing of the throttle.