How do I fix my Canon IXUS lens error?

9 Answers

1. Remove the batteries and wait a few minutes.
2. Try pressing and holding the Menu, Function, Function Set, or OK while turning on the camera, or otherwise find a “factory reset” option.
3. Try turning the camera on without a memory card inserted.

What is lens error?

A mechanical impact to the lens unit caused by shock, pressure or blocking the lens movement can result in damage to its mechanical parts. This can cause further damage to the integrated motors or drives. In such cases, the camera will display the error message ‘LENS ERROR’, as shown below.

How do I reset my Canon camera?

You can restore the default settings of shooting functions and menu functions.

1. Set the power switch to .
2. Press the button to display the menu screen.
3. Under the [ ] tab, select [Clear all camera settings], then press .
4. Select [OK], then press .

What does E18 mean on camera?

The E18 error is an error message on Canon digital cameras. The E18 error occurs when anything prevents the zoom lens from properly extending or retracting. The error has become notorious in the Canon user community as it can completely disable the camera, requiring expensive repairs.

How do I reset my camera lens?

Cameras with a RESET button

1. Locate the RESET button on the camera.
2. Using pointed object (like a ballpoint pen), press and hold the RESET button for 2-3 seconds.
3. Release the RESET button.

How do you know if your camera lens is broken?

If you have the ability to see images produced by a lens or camera body you can look for some things such as dark spots, which may indicate dust or dirt on the lens, or banding which may indicate some deeper malfunction. For a lens, the most common problems show up as poor focus, or uneven focus across an image.

How do I know if my camera lens is broken?

Examine the lens with the light reflecting off surfaces at several angles and you should be able to tell if any light scratches are present. A lens that has been stored in a dark and moist (and/or humid environment) or stored after getting wet can have a fungus bloom inside the lens.

Can a dropped camera lens be repaired?

You can take your lens to the authorized company dealer to ask for repairs if possible. In some cases the damage is so much that repairs are not possible and the only solution you have is to replace it altogether.

What does lens obstruction mean?

The FZ43 lens is probably jammed or some foreign object(s), dust, dirt, etc., is preventing the lens from functioning properly. Simply power the FZ43 off and restart it to reset the lens. Be sure to check for any particles or other foreign objects around the edges of the lens and carefully clean with a soft, dry cloth.

Why is my camera lens stuck?

Usually a stuck lens is caused by dirt getting into the gap between the lens barrel sections. The simplest thing to try is a freshly recharged battery, which might just have the power to overcome the resistance. Plugging in an AV cable sometimes blanks the screen, leaving just a bit more battery power for the lens.

Is there a reset button on a Canon camera?

Performing a factory reset on your camera will erase all custom settings you have set. Tap on the Menu button. Tap on the 3rd Wrench. Tap on Clear Settings.

How do I fix my Canon E18 error?

Repairing the E18 error

1. Canon’s instructions (by phone) are to ‘remove the batteries, rotate the on button and hold for 5 seconds, and then replace the battery’. The few lucky pictures are clear and in focus.
2. A better solution (not provided by Canon) is to connect the camera to the TV or a computer.

What does E18 4 mean on DSTV?

E18-4 (This channel is not available for this location.) If viewing doesn’t resume within half an hour please contact one of our service centres. E19-4 (Channel Currently Scrambled) This channel is blocked because your decoder has been inactive or your services may have been suspended.

Can a lens stop working?

There are a number of different ways Google Lens may stop working. Lens may simply not work the way it’s supposed to and identify objects within images, or it might not even start up and, instead, display an error message of some kind to the user – or one of half a dozen different things.

How do I know if my lens is bad?

How do I know my lens is broken?