What is 408A refrigerant?

Forane® 408A refrigerant (R-408A) is a non-ozone depleting, near-azeotropic HCFC blend of R-22, R-125, and R-143a that was designed to match the performance of R-502. R-408A is a retrofit solution for medium and low temperature refrigeration systems that are currently using R-502.

What is the replacement for 408A refrigerant?

R-502
An R-502 Replacement for Limited Condensing Capacity Systems Freon™ 408A (R-408A) refrigerant is a hydrochlorofluorocarbon (HCFC) option designed to replace the hydrofluorocarbon (HFC) refrigerant R-502.

What is r502 refrigerant used for?

Before its phaseout in 1995, it was used in low temperature refrigeration (the evaporator pressure stays out of vacuum down to -40°F). R-502 offered lower discharge temperature and improved capacity compared to R-22….Product Information.

Part Number	Product Description
30R502	30 LB. CYLINDER
125R502	125 LB. CYLINDER

What is the replacement for 409a refrigerant?

Freon™ 134a (R-134a) Refrigerant.

What is R409A used for?

R409A, an HCFC-based refrigerant, is a cost-effective retrofit refrigerant for R12 stationary positive displacement air-conditioning and refrigeration systems such as walk-in coolers, beverage dispensers, vending machines, and supermarket systems.

Is AZ 20 The same as 410A?

R-410A, sold under the trademarked names AZ-20, EcoFluor R410, Forane 410A, Genetron R410A, Puron, and Suva 410A, is a zeotropic but near-azeotropic mixture of difluoromethane (CH2F2, called R-32) and pentafluoroethane (CHF2CF3, called R-125) that is used as a refrigerant in air conditioning and heat pump applications.

Can Poe oil be used with R22?

Even with the use of POE oil in R22 compressors, allied does not recommend or allow the use of any “drop-in” R22 replacement refrigerants. Use of any refrigerant other than R22 will affect the system capacity and efficiency, and will void the manufacturer’s warranty.

Is R502 still available?

Since the phase-out of R-502 in 1995, service quantities are still available through recovery and reclaim operations.

Can you replace R502 with R404A?

R404A refrigerant is accepted as an alternative to R502 in the new equipment. It can be used also for charging of some systems operating on R502, such as commercial refrigeration equipment of big universal shops, refrigeration facilities of food industry factories, transport refrigeration facilities.

Is R134a phased out?

HFC-134a: a Potent Greenhouse Gas HFC-134a will no longer be approved for use in new light-duty vehicles manufactured or sold in the United States as of model year 2021 as a result of EPA’s July 2015 final rule under SNAP (July 20, 2015, 80 FR 42870Exit Exit EPA website).

What refrigerant can be mixed with 404A?

R-449A is an HFO-based refrigerant blend designed to replace R-404A in stationary refrigeration applications. It combines excellent cooling performance and energy efficiencies with a low-GWP value of 1,397. Also, existing polyolester lubricants used with R-404A can also be successfully used with R-449A.

What is R409A Freon?

Is R409A drop in for R12?

The R409A was one of the most used blends for drop-in replacement in equipments using R12 [6].

What is the difference between R404A and R507?

The average pressure ratio of R507 is higher by 2.8%, while that of R404A is higher by 19.6% than that of R22. R507 has advantage of lower compressor power than both R22 and R404A. The average compressor power of the system obtained using R507 and R404A are 6.5% lower and 7.2% higher than that of R22, respectively.

Is R507 and R507A the same?

R507A is an HFC azeotropic blend with zero ODP. It is an accepted alternative to R-22 and R-502 in low and medium temperature commercial refrigeration systems. It exhibits similar performance to that of R-502 over the operating range….R507.

Items	Specification
GWP100 years，CO2=1	3985
Substitutions for refrigerants	R502, R22

What is AZ-20 refrigerant used for?

Chillers. Genetron AZ-20 serves as an excellent replacement for HCFC-22 in new chillers, particularly positive displacement chillers. It also may serve as a retrofit fluid for replacing HCFC-22 in some existing chillers with components approved for high pressure, especially those with flooded heat exchangers.

What refrigerant can be mixed with R-410A?

You can mix R-22 and R-410a refrigerant in the same system.

What is the best drop in replacement for R22?

The best replacement for R-22 Freon is usually R-407c. It has a very low loss in capacity (0 – 5%) relative to R-22 and is less expensive than many other R-22 replacement refrigerants. If a system has R22 in it already you cannot use a replacement refrigerant to simply add to the R22.

What refrigerant is compatible with POE oil?

Polyolester oil (POE oil) is a type of synthetic oil used in refrigeration compressors that is compatible with the refrigerants R-134a, R-410A and R-12. HFC-134a with POE oil as the lubricant is a replacement for CFC-12 with mineral oil as the lubricant.