How much PSI is a FOX Float fork?
How much PSI is a FOX Float fork?
All other FOX forks can use up to a 203mm rotor (including SC 29in). Do not exceed maximum air pressure: 32 FLOAT maximum air pressure is 140 psi.
When should I rebuild my FOX shock?
A complete shock rebuild is recommended every 1,000 miles for off-road race applications. Split street/off-road–use vehicles every 10,000 miles, and street every 50,000 miles. A FOX complete shock rebuild service includes new seal kit, new proprietary JM92 Suspension Fluid, deburr and polishing of shock shafts.
Can you rebuild Fox shocks?
FOX’s shocks are ‘serviceable’ – meaning each shock can be rebuilt with new internals, and a new nitrogen gas charge can be applied to the shock, complete ride refreshment.
What pressure should my FOX forks be?
Sag should be set to 15 – 20% of total fork travel
| Suggested Starting Points for Setting Sag | ||
|---|---|---|
| Rider Weight (lbs) | Rider Weight (kgs) | 34 FLOAT Pressure (psi/ bar) |
| 120-130 | 54-59 | 58psi/ 4.0 bar |
| 130-140 | 59-64 | 63psi/ 4.3 bar |
| 140-150 | 64-68 | 68psi/ 4.7 bar |
How much air does a FOX Float shock need?
Blur
| FOX Float DPS | ||
|---|---|---|
| Rider Weight | Air Pressure | Shock Sag |
| 120lbs (54.4kg) | 150 psi | 9-11mm |
| 140lbs (63.5kg) | 175 psi | 9-11mm |
| 160lbs (72.6kg) | 200 psi | 9-11mm |
How often do you rebuild FOX shocks?
How often should I service my FOX forks?
Fox recommends that the minimum suspension fork and shock service is 125 hours of use, yearly, or whichever comes first. That is certainly on the longer side of things. Similar to changing the oil in your car, the more frequently you service your suspension, the better the fork will perform for longer.
What pressure should I have in my rear shock?
The exact PSI you end up with depends on how plush/firm you want the rear shock to be, but a good starting point is 1 psi for 1 lbs in weight of the rider (including riding gear).
How long should FOX shocks last?
You spent a good deal of money on some high performance Fox shock absorbers, expecting them to last a good amount of time. Even if they dont last 5-6 years, you expect them to at least make it 1 or 2 years without problems.
How often do FOX shocks need to be rebuilt?
How often should Fox forks be serviced?
Fox Suspension Service Fox recommends that the minimum suspension fork and shock service is 125 hours of use, yearly, or whichever comes first.
How much does it cost to rebuild bike forks?
Cost: $150 – $400 Motorcycle shops and dealers costs vary greatly depending upon where you live geographically but from the feedback we hear from our customers is they were quoted as low as $150 and as high as $400 to have a shop fully remove the forks and replace the fork seals.
How do you set fork air pressure on a 32 float?
Setting Fork Air Pressure. 32 FLOAT maximum air pressure is 125psi. Unscrew the blue air cap on top of the left fork leg counter-clockwise to expose the schrader valve. Attach a FOX High Pressure Pump to the schrader valve.
Can I disassemble a Fox suspension product?
DO NOT attempt to disassemble any portion of a FOX suspension product, unless expressly instructed to do so by the applicable FOX technical documentation, and then ONLY while strictly adhering to all FOX insturctions and warnings in that instance.
Why does my 32mm float Fork look different than shown?
As many 32mm FLOAT forks have been built with slightly different internal air spring systems, your fork may appear different than that shown.
How much oil do you put in a Fox Fork?
Inject 3cc of FOX 20wt. Gold oil into the main air chamber through the top of the upper tube. Reinstall the topcap into the fork crown and tighten clockwise to 220 in-lb (24.8 Nm) torque with your 6-point chamfer-less 26mm socket.
