Where is the password on a Buffalo router?

Changing the SSID (Network Name) on a Buffalo AirStation Log in to Settings. The default username is “admin” and the default password is “password”. Click the “Wireless” tile. Enter a new SSID for the 11n and/or the 11ac network, then click Apply.

How do I log into my Buffalo router?

Buffalo Router Login

1. Connect router cable to your Laptop or Computer. Alternatively use your wireless network.
2. Open your web browser of choice and type IP address of your Buffalo router in the address bar.
3. Now enter the default username and password of your router by accessing the admin panel.

How do I reset my Buffalo router password?

Forgotten password / Reset for Wireless devices

1. Look for the INIT or Reset button on the device. Press and hold for about 10 seconds (The only exception is the WBMR-G54, here press the reset button for about 20 seconds).
2. If the red diag light starts flashing release the button. Wait until the router is restarted. (

Does Buffalo still make routers?

Buffalo AirStation HighPower N600 Gigabit Dual Band Open Source DD-WRT Wireless Router (WZR-600DHP) Only 2 left in stock – order soon.

What is the default password for Buffalo TeraStation?

Turning the TeraStation On and Off Note: The default username and password are “admin” and “password”.

What is the default password for Buffalo Linkstation?

password
The default username and password are “admin” and “password”. From Settings, click on the “Network” tab on the left and then click on the widget icon to the right of “IP Address”. Click on “LAN Port 1” to open the IP address settings for that port.

What is Buffalo IP?

Buffalo AirStation’s default IP address is : Router Mode. 192.168.11.1. Bridge Mode. 192.168.11.100.

How do I reset my Buffalo WIFI?

How to Hard Reset a Buffalo Router

1. Press and hold the reset button at the back of the Buffalo router for 30 seconds.
2. Disconnect the power from the router while continuing to hold down the reset button.
3. Reconnect the power after five seconds.
4. Continue to hold the reset button for 30 seconds.
5. People are Reading.

How do I connect to UB WIFI?

1. Click the Wi-Fi icon in your system tray in the lower right corner of your screen and select UB Connect from your available Wi-Fi networks.
2. Open your web browser and go to connect.buffalo.edu.
3. Click Start Connection Wizard.
4. Click Configure and Connect.
5. Click Save File.

How do I reset my Buffalo NAS TeraStation?

To reset the TeraStation to its factory default settings, power on the unit and hold down the reset button for five seconds. In the Web Admin interface, you can initialize almost all settings, including things that are not initialized from the reset button without the data saved in the TeraStation.

How do I factory reset my Buffalo NAS?

Initializing from Settings

1. In Settings, navigate to [System] – [Restore/Erase].
2. Click [Restore LinkStation].
3. The “Confirm Operation” screen will open. Enter the displayed number within 60 seconds, then click [Apply].

How do I reset my Buffalo LinkStation admin password?

TeraStation TGL / HTGL / RHTGL / ITGL / RITGL / DHTGL / TS-X series

1. Open the front panel and look under the left corner of the LCD screen for the red Init button.
2. Press and hold the red button for 10 seconds. The device will start beeping. The password and IP address has been changed to default.

How do I connect Buffalo LinkStation to my computer?

NAS Navigator2 will proceed by setting up Automatic IP….How to: Connect a TeraStation or LinkStation directly to a PC.

1.	Connect the Ethernet cable from PC LAN port to the NAS device.
2.	For a PC, double-click the icon. For Mac OS, click the icon in the Dock. NAS Navigator2 will start.
3.	Click [Refresh].

How do I find the IP address of my Buffalo NAS?

Click on Start > Program Files > Client Utiltiy. This will scan the network for NAS devices and supply you with an IP address. If that fails, press the INIT button on your device (click here to refer to the Answer), which will reset the IP address to DHCP. Use the Client Utility again to find the IP address.

What is the default IP address for a Buffalo router?

Enter the IP 192.168. 11.1 into your browser and pressing enter.

What is the IP address for Buffalo router?

How do I reset my Buffalo Airstation WHR HP G300N?

To reset the Buffalo WHR-HP-G300N to its default settings, you have to do the following steps:

1. Switch on router.
2. Press RESET button and hold for at least 5 seconds.
3. Device restarts automatically.
4. Restoration of standard settings is finished.

How do I reset my Buffalo AirStation WHR HP G300N?

What happened Buffalo routers?

In late November 2007, Buffalo announced they would temporarily stop supplying wireless LAN products in the USA due to the ongoing lawsuit filed by the 802.11a, 802.11g and 802.11n patent holder CSIRO.