Does Hondata S300 have boost by gear?
Does Hondata S300 have boost by gear?
The S300 can control boost by using a duty cycle controlled output on OBD1 ECU pin A11 with a boost control solenoid to regulate air to the wastegate. Boost may be fixed, or varied by gear, with two settings which allow for wet/dry, pump/race gas or street tire/slicks settings to be selected with an external switch.
What can you do with Hondata S300?
The s300 is a plug in module to the factory Honda Engine Computer (ECU) which vastly expands the capabilities of the factory ECU. Forced induction, datalogging, real time updating of parameters, engine protection are but a few of the s300 features.
Does Hondata S300 have Bluetooth?
Hondata s300 Programmable ECU Guide. Bluetooth options are available from the S300 window under the Bluetooth tab. Bluetooth enabled – enables or disables Bluetooth on the S300. Local Address – the Bluetooth address of the Bluetooth Radio on the laptop.
What ECU can you put Hondata in?
To use a Hondata system, you must use a compatible OBD1 ecu from the list at http://www.hondata.com/ecus.html. You can then use the s100, s200 or s300.
How much is a Hondata S300?
Prices
| Item | Price |
|---|---|
| S300/S300j programmable system | $495 |
| Coil Pack Retrofit with wiring harness | $395 |
How do I connect my Bluetooth to my Hondata S300?
To connect to the S300 from a laptop use the Online / Bluetooth menu or click on the Bluetooth button in the toolbar. The vehicle ignition must be on. The Select Bluetooth Device window will be shown. Windows will remember previously discovered s300s, but will not find new s300s unless you use the Refresh button.
What ECU does the Hondata s300 work with?
1989-2001
| ECU | Connectors | Hondata Systems |
|---|---|---|
| PR3 | OBD1 | s300 |
| PR4 | OBD1 | s300 |
| P06 | OBD1 | s300 |
| P08J | OBD1 | s300j |
Can you put Hondata on a chipped ECU?
most hondata dealers can socket/chip your ecu as well as get the hondata and parts recommendations you need.
What is Hondata boost by gear?
Hondata Boost Control Solenoid. The Hondata 4 port boost controller precisely directs pressure to the top and bottom of your waste-gate diaphragm. It allows much lower waste-gate spring pressure for better low gear boost control and perfect high gear, high boost control.
Which Hondata has Bluetooth?
Hondata Mobile is an App for iOS and Android, which connects your mobile device to your Bluetooth enabled FlashPro, KPro4 or white board S300 V3.
What is the Honda S300 version 3?
The s300 version 3 is a plug in module to the OBD1 factory Honda Engine Computer (not included) which vastly expands the capabilities of the factory ECU. Forced induction, datalogging, real time programming, Bluetooth and engine protection are but a few of the comprehensive s300 features. Designed, manufactured and assembled in the USA.
What are the features of the S300?
Forced induction, datalogging, real time programming, Bluetooth and engine protection are but a few of the comprehensive s300 features. Designed, manufactured and assembled in the USA.
Does the S300 have a datalogging feature?
The s300 has datalogging to the SManager software built in via the USB or Radio technology. Using a laptop or mobile device the various ECU sensors can be data-logged, viewed, graphed and saved for later analysis. Additionally the s300 has on board flash memory which allows a datalog to be made without a laptop, for later access and download.
Is the S300 legal in the USA?
Designed, manufactured and assembled in the USA. There are rectangular frame ECU (US) and square frame ECU (Japan) versions of the s300. The S300 uses SManager software for tuning and datalogging. Within the USA this product is legal only for racing vehicles which may never be used upon a public highway.
