How do I reset my Brother HL 2170W network settings?

Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until the Toner, Drum and Error LEDs light up. Release the Go button. Make sure that all the LEDs turn off.

How do I connect my Brother printer to a new WIFI?

To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an electrical socket.
2. Press Menu button on the machine’s control panel.
3. Press the Up or Down arrow key to select Network and press OK.
4. Press the Up or Down arrow key to select WLAN and press OK.

How do I print a network configuration page on my Brother printer?

How do I print a network configuration page?

1. Press the ‘+’ key until you see “INFORMATION”
2. Press the ‘SET’ key.
3. Use the ‘+’ or ‘-‘ keys until you see “PRINT SETTINGS”
4. Press the ‘SET’ key and the print configuration pages are printed.

How do I connect my Brother printer to WPS?

Connect the printer’s power cable to the power supply source.

1. Click the power button on the printer. A green light will come on and wait 10 seconds until the next step.
2. Click the WPS button on your router for three seconds.
3. Click the printer’s WPS button for three seconds.

What is the WPS PIN on my Brother printer?

While attempting to set up the Brother machine on a wireless network, you may see a screen requesting a WPS PIN to complete the setup. This typically occurs if Wi-Fi Direct is enabled on your machine and you attempt to add a Wi-Fi Direct connection using Printers and Scanners in Windows.

What does WPS AOSS mean?

Wi-Fi Protected Setup
If you have a WLAN access point/router supporting WPS (Wi-Fi Protected Setup) or AOSS™ (AirStation One-Touch Secure System), you can easily connect your Brother machine to your wireless network as below. To use WPS or AOSS™, your WLAN access point/router must support WPS or AOSS™.

How do I print a configuration page on Brother HL 5370dw?

You can check the current network settings by printing out a Network configuration page. Hold down Go for 10 seconds. Release Go when the machine prints a Network Configuration page. If you release Go in less than 10 seconds, the machine will print if you have any reprint data.

How do I reconnect my Brother wireless printer after changing my router?

If you recently replaced or reconfigured your router, you will need to reset the Brother machine and connect it to your new network. You may also need to uninstall and reinstall the MFL-Pro software and drivers on each computer on your network to restore printing and scanning capability.

Where is the IP address on Brother printer?

Press the [Menu] and navigate to the WLAN tab (using the ▲/▼ arrows and the [OK] button) Press ▲ and select WLAN Status. Select Infrastructure Mode. The screen will display your network connection settings, your IP Address is listed on the third line.

How do I access my Brother printer settings?

Configure the default printer settings – Windows

1. Right-click on the Brother printer driver and left-click on Printing Preferences.
2. PAPER SIZE: The Paper Size selection includes a large selection of standard paper sizes.
3. ORIENTATION: Chooses the position your document will be printed (Portrait or Landscape).

Can’t connect to Brother printer over Wi-Fi?

Power on the Wi-Fi router and your laptop.

Power on your printer.

Go to your Brother’s printer Wi-Fi setup to connect it to your Wi-Fi.

Select the SSID of your Wi-Fi network.

Change your Brother’s printer default password from the printer and enter the Wi-Fi security password of your Wi-Fi.

How do I find the IP address for my Brother printer?

How do I assign an IP address to my Brother printer?

Front Panel Method

1. Press the ‘+’ button until ‘NETWORK’ is displayed on the printer LCD panel.
2. Press the ‘Set’ button to display ‘TCP/IP’ On printers with two line displays,
3. Press the ‘Set’ button.
4. ‘TCP/IP ENABLE’ is displayed.
5. Press the ‘+’ button.
6. IP ADDRESS is displayed.
7. Press the ‘Set’ button.

How do I get my printer to recognize my new router?

Use the Wi-Fi Protected Setup (WPS) button on your router to connect the printer to your Wi-Fi network.

1. Place the printer near the Wi-Fi router.
2. Put the printer in WPS connection mode.
3. Within two minutes, press and hold the WPS button on the router until the connection process begins.

How do I install the brother hl-2170w series printer driver?

In Default view, select Brother HL-2170W series. Next to Print Using, the CUPS driver should be listed. Click Add. 13. The Brother HL2170W series printer icon now appears in the Print & Fax window. Setup is now complete. If you wish to install the printer driver on a different computer, please follow these printer driver installation steps again (

How do I Configure my brother printer for wireless printing?

When configuring your Brother wireless printer, you must configure your printer to match the Authentication and Encryption settings you recorded earlier for your existing wireless network. Choose the Authentication Method and Encryption Mode from the pull-downs in each setting box.

Where can I find the MAC address for my brother nc-7400w?

The MAC Address is available on the Wireless Settings Page. Make sure the Node Type is Brother NC-7400w. NOTE: If you do not have this network settings information, or cannot find this information, do not proceed with the wireless setup.

How do I enable the wireless interface on my Device?

To enable the wireless interface, press and hold down the GO button until a page prints NOTE: If the IP Address is still 0.0.0.0, wait another minute and print out the settings pages again.