How do I reset my Samsung Blu-ray player to factory settings?

1 Power on your Blu-ray player if it’s not already on, tune your TV to the input where the Blu-ray player is connected. 2 With no disc in the player press and hold the Play/Pause button infront of the BD player for about 8 seconds or until “Resetting all settings to default values…” is displayed on your TV screen.

How do I reset my Samsung home theater?

Access the Home Theatre system menu and connect to a TV.

1. 1 Press Menu.
2. 2 Press Settings.
3. 3 Enter.
4. 4 Reset will appear and press enter.
5. 5 Enter pin 0000 and press enter.
6. 6 Select yes and press enter.

Why is my Samsung Blu-ray player not turning on?

Attempt a power reset by pressing and holding the Fast Forward button for more than 5 seconds. All of the player’s settings will be reset to their factory settings. If the power does not turn off, unplug the power cord from the electrical outlet for one minute, and then plug the cord back in.

How do I reset my Blu-ray player to factory settings?

Follow these steps to perform a factory reset on your Blu-ray Disc™ player:

1. On the supplied remote control, press the HOME button.
2. Select Setup.
3. Select Resetting or. icon.
4. Select Reset to Factory Defaults Settings.
5. Select All Settings.
6. Select Start.
7. Select Close.
8. Turn off your device, then turn it back on.

How do I reset my home theater system?

How to reset the DVD home theatre system to the factory default specifications.

1. While the DVD player is in the stop mode, press the DVD SETUP button.
2. Press the UP ARROW or DOWN ARROW to select SETUP .
3. Press the ENTER button.
4. Press the UP ARROW or DOWN ARROW to select RESET .
5. Press the ENTER button.

How do you fix a Blu-ray player that won’t turn on?

Blu-ray, DVD or DVR Player Won’t power on.

1. Check to make sure that the unit is plugged in securely to the power source (outlet, or power strip).
2. Press the Power on/ standby button on the front of the unit to turn the unit on.
3. Reset the unit by unplugging it for one (1) minute.
4. Try another power outlet.

Can you reset Blu-ray player?

Press the Home button on the Blu-ray Disc player remote. Once the menu is displayed, press the Left arrow button on the remote and navigate to the option Setup. On Setup, use the Down arrow button and go to Resetting and press the Enter button.

Why won’t my Blu-ray player open?

Perform a power reset. Press and hold the POWER button for ten seconds until the Blu-ray Disc player turns off. After the Blu-ray Disc player turns off, press the POWER button again to turn it back on. Press the OPEN/CLOSE button on the front of the Blu-ray Disc player to open the disc tray.

How do I reset my soundbar without a remote?

How do I reset my Samsung soundbar if I don’t have access to a remote? For the soundbar to function properly, you must hold down the power button until the display reads “INIT OK.” If you have an old soundbar that does not have a display, you will see a red led blinking and then turning off once the reset is completed.

How do I reset my surround sound system?

1. Unplug and plug back in the power cord, then turn on the system.
2. At the same time, press and hold the STOP and Folder – (minus) buttons until RESET appears on the display window.

Why is my Blu-ray not working?

The Blu-ray disc tray may be damaged – If you have an ejectable disc tray, eject your disc and take care to observe any slow opening, wobbles, or misalignment. Try reseating the disc. Blu-ray cables may be loose – A loose connection or incorrect connection will prevent the video from being displayed.