How do I setup my D-Link DI 524 wireless router?

How to setup WPA-PSK (wireless security) for DI-524?

1. Step 1 Connect Your PC (Laptop) to the Router (Port 1,2,3,4 either one of them) using a network cable.
2. Step 2 Launch IE (Internet explorer).
3. Step 3 Key in your user name and password (User name is Admin with no password by default).

How do I reset my D-Link admin password?

For most D-link routers you can power on the router, find the “reset” button (it will be recessed on the bottom or back) so get something link a paperclip and hold it down for 10 seconds approx. until the router’s lights blink. The default admin name & pass should now be restored.

How do I configure my Dlink router as a switch?

Connect your D-Link switch to your network router with a network cable and turn it on. Plug another network cable into a network-out port on the switch and plug the other end of it into your computer.

How do I use an old Dlink router as a switch?

Re: Turn router into Switch if you want to turn your 4500 into a switch, go into the Basic/Network and disable the DHCP service. Save the settings and reboot if asked. Once it’s done, connect your cables to the LAN ports. Don’t use the WAN port or it won’t work.

How do I reset my Dlink router?

How do I reset my router to factory default settings?

1. Step 1: With the router on, insert the end of a paper clip into the pinhole highlighted below.
2. Step 2: Hold the paper clip down for 10 seconds and release.
3. Step 3: The unit will reboot automatically. Once the WLAN light stops blinking, the unit has been reset.
4. Note:

How do I connect my D-Link wireless router?

Follow these steps to set up your D-Link Router –

1. Power on your D-Link Router.
2. Connect your PC to the router using an Ethernet Cable or WiFi.
3. A login page will appear.
4. Now, you can configure and set up your router using the Internet Connection Setup Wizard.
5. Under Wireless Setup enter SSID (WiFi Name) and Key (Password).

What is the password for my router?

Check your router’s default password, usually printed on a sticker on the router. In Windows, head to Network and Sharing Center, click on your Wi-Fi network, and head to Wireless Properties > Security to see your Network Security Key.

How can I reset my router password?

If you can’t access the router’s web-based setup page or forgot the router’s password, you may reset the router to its default factory settings. To do this, press and hold the Reset button for 10 seconds. NOTE: Resetting your router to its default factory settings will also reset your router’s password.

What is the password for the D-Link di-524 router?

D-Link discontinued the DI-524 Wireless Router on February 01, 2008, in the U.S. Most D-Link routers don’t need a password by default, and that’s true for the DI-524 router, too. When logging in to your DI-524, just leave the password field blank.

How do I Configure my network or the di-524up?

Whenever you want to configure your network or the DI-524UP, you can access the Configuration Menu by opening the web-browser and typing in the IP Address of the Address is shown to the right:

Why is my di-524 default password not working?

The DI-524 Default Password Doesn’t Work! If the blank default password for your DI-524 router isn’t working, it most likely means you’ve changed it since it was first installed (which is good). However, the bad thing about changing the password to anything other than a blank one is that it’s easier to forget it.

How do I Reset my di-524 router to factory settings?

With something small and sharp, like a paperclip or pin, hold down the button inside the Reset hole for 10 seconds. The reset hole should be on the far right side of the router, next to the power cable. Wait 30 seconds for the DI-524 router to finish resetting, and then unplug the power cable for a few seconds.