How do I access my Motorola SURFboard SBG6580?

Enter http://192.168.0.1 into the address box, and press the Enter key. The Login page will appear. On the Login page, enter admin in the Username field. Enter motorola in the Password field then click the Login button.

How do I bridge my Arris SBG6580?

Bridge Mode Guide | SBG6580

1. Unplug Coax Cable from Motorola.
2. Reset the Modem with Factory setting.
3. Turn Modem back online, Connect Your PC to the modem using hard wire.
4. Turn off Wireless Network.
5. Disable NAPT Mode.
6. Disable DHCP.
7. Bridging the MAC address of your router:

How do I put my SBG6580 in bridge mode?

How to Bridge a Motorola SBG6580

1. Unplug the coaxial cable from the back of the modem.
2. Connect a computer to one of the Ethernet ports.
3. Open the Web browser; then type “http://192.168.0.1” in the address bar.
4. Enter the user name and password.
5. Select the “Basic” tab, and set “NAPT mode” to “Disabled.” Click “Apply.”

How do I reset my ARRIS SBG6580 G228?

Factory Reset Carefully insert the tip of a pen or an unwound paperclip into the reset switch and press on to it. Hold down the Reset switch for 5 -10 seconds and release it. NOTE: To assure the gateway factory defaults, hold the reset switch for 5 -10 seconds. The indicators are that all LEDs turn off.

What is the default Login for ARRIS router SBG6580?

By default, the username is admin, and the password is password. For network security purposes, ARRIS recommends to change the default admin user name and password after logging onto the SBG6580-2 for the first time.

Is SBG6580 dual band?

The SURFboard SBG6580 Wi-Fi Cable Modem is 3 products in one device: DOCSIS 3.0 Cable Modem, Dual-Band 802.11n Wi-Fi Access Point and 4-port Gigabit Ethernet Router. Capable of download speeds up to 343 Mbps and Wi-Fi speeds up to 300 Mbps per band, the SBG6580 is an affordable, complete solution for your home network.

How do I update my Arris router software?

To do this:

1. From the Setup page on the router interface, select Status.
2. Choose Router Upgrade from the drop-down menu.
3. Select Browse and navigate to the file you just downloaded.
4. Select Upgrade and confirm.
5. The file will be uploaded and installed. Do not switch off the router until the upload is complete.

How do I update the firmware on my ZTE router?

How to load new firmware onto your router

1. Step 1: Log in to your router.
2. Step 2: Determine the router’s firmware version.
3. Step 3: Determine the latest available firmware version.
4. Step 4: Download the latest firmware.
5. Step 5: Upload the new firmware to your router.
6. Step 6: Wait for the magic to happen.

What is bridge mode on Arris modem?

Bridged Mode This means that the modem will act as a bridge, i.e. the public IP (IP address assigned by the ISP) is going to be taken by the customer equipment such as the router instead of the modem.

How do I reset my Motorola Surfboard SBG6580 password?

Changing SBG6580 Login and Password To change the factory default login, go to the following screen and change your login combination. Select Status -> Security and use the drop down box to either change the username or the password.

Can I upgrade the firmware on the sbg6580-2?

The SBG6580-2 does not support manual software upgrades. Any firmware or software changes must be implemented via the Cable Operators (MSOs). The Cable Operators (MSOs) can update the firmware based on what they have approved for their network.

What are the features of the sbg6580-2?

Some features may vary depending on the software version of the SBG6580-2. The SBG6580-2 does not support manual software upgrades. Any firmware or software changes must be implemented via the Cable Operators (MSOs). The Cable Operators (MSOs) can update the firmware based on what they have approved for their network.

What is the SURFboard SBG6580 Wi-Fi cable modem?

High-speed Internet and Wireless N at your fingertips. The SURFboard SBG6580 Wi-Fi Cable Modem is 3 products in one device: DOCSIS 3.0 Cable Modem, Dual-Band 802.11n Wi-Fi Access Point and 4-port Gigabit Ethernet Router.