How much does a fieldpiece cost?

New (12) from $136.00 & FREE Shipping.

What is true RMS meter?

True RMS responding multimeters measure the “heating” potential of an applied voltage. Unlike an “average responding” measurement, a true RMS measurement is used to determine the power dissipated in a resistor. The power is proportional to the square of the measured true RMS voltage, independent of waveshape.

What does EF mean on fieldpiece?

A three segment graph and RED LED will display the presence of voltage. The audible beep increases from intermittent to continuous as intensity of field (EF) increases.

What is the difference between RMS and True RMS meter?

A true-RMS meter can accurately measure those imperfect, nonsinusoidal waves, as well as perfect, sinusoidal waves. “RMS” stands for root-mean-square, which is a calculation used to determine the equivalent DC value of an AC waveform.

Do I need true RMS?

If every AC signal that you wish to measure the RMS value of is a pure sine wave, then you don’t need a true RMS meter. If, however, you want to measure the RMS value of a square wave, the output of a half-wave rectifier or something else more complex, then a true RMS meter will be advantageous.

What does OL mean on fieldpiece gauge?

Over range: “OL” or “-OL” is displayed. Operating environment:32°F to 122°F (0°C to 50°C) at <75% RH. Temperature coefficient: 0.1 x (specified accuracy) per °C (0°C to.

What is dISC on fieldpiece meter?

If dISC is displayed, the capacitor is not discharged completely.

How many ohms should a gas valve have?

Test the coils with an ohmmeter with the wires disconnected (you only need to disconnect one wire on each coil) and you should get around 40-60 Ohms resistance at the two leads of each coil. If the meter reads much lower or much higher then the coil is bad and needs to be replaced.

How many volts should a flame sensor read?

Now we want to check flame sensor voltage. If the voltage is not within range there will not be enough electrical pressure to push the current through the flame. With your voltmeter, check the voltage between the sensor wire and the burner – it should be 90-107 volts AC.

What do you need to know about fieldpiece online?

A unique online training platform for Fieldpiece products and applications. Every product manual for every Fieldpiece product in an easily searchable database. Keep your Fieldpiece products up-to-date with easy software and firmware updates. Answers to commonly asked questions about our products. Which Fieldpiece Multimeter is right for you?

How do I Activate my fieldpiece warranty?

Search our global database. Register your Fieldpiece product to activate your warranty and receive software/firmware updates. Contact us for questions about your product’s warranty and for needed repairs.

Why fieldpiece HVACR?

More than 25% off the Fieldpiece crew are dedicated to engineering and product development, and more than half of the staff are certified HVACR technicians. We ride along with, and help train HVACR professionals all over the country, and now, all over the world. Giving Back with a Purpose – Beyond the Holidays.