What is preventive maintenance air compressor?

The key parts to check include the filters, vents, belts and bearings, all of which could become troublesome to the system if dirt and grime build up. Moreover, you must apply and reapply lubricant at timely intervals on all applicable parts of an air compressor.

What maintenance tasks should be carried out on air compressor?

Air Compressor Maintenance Checklist

• Visually Inspect Air Compressor.
• Check and Log Drive Motor Bearing Temps.
• Check and Log Fan Motor Bearing Temps.
• Inspect Coupler, Hub and Shaft Seal.
• Check and Log Oil Cooler Temps.
• Check and Log After Cooler Temps.
• Inspect Scavenge Line Check Valve.
• Check Drive Belt condition if applicable.

How often do air compressors need servicing?

But what is the importance of servicing your air compressor? Most manufacturers recommend servicing an air compressor every year or every 2,000 hours whichever is the shorter. 2000 hours is effectively single shift operation 52 weeks a year. Air Compressors work quite hard for long periods of time.

How do I protect my air compressor?

Make sure that all air-cooled, heat exchangers, such as the air/oil cooler on the air compressor and the condenser on a refrigerated dryer, are kept clean and free of debris that may partially block the airflow or reduce the heat exchange efficiency.

Why is it important to follow preventive maintenance for air compressors onboard?

An air compressor is a machine, and all machines require regular maintenance if they are going to work their best. Proper preventive maintenance for air compressors can identify potential issues before they cause serious and expensive problems. This process can also help you extend the life of your equipment.

How often should compressors be inspected?

The recurrent inspection of compressors is based on the risk assessment for air compressors. As a rule, the inspection takes place every 4 years.

How do I keep my compressor from rusting?

The most effective way to prevent rust in your air tanks is to drain each tank regularly after every operation. This process helps eliminate the condensation that’s pooled at the bottom of the tank. After draining, leaving the valve open for a couple of hours will allow the inside of the tank to dry out.

What is the important of preventive maintenance?

A preventive maintenance program is an important part of successful facility management. It keeps equipment operating efficiently, increases the safety of your employees, and helps you avoid large and costly repairs down the road.

Do air compressors need to be inspected?

The air compressor and driving motor do not need an inspection – but should be regularly serviced and maintained by the user. Some air compressors only have two components – a driving motor and an air compressor. The delivery of compressed air is immediate and the need to store air in a pressure vessel is not required.

Do all pressure vessels need to be inspected?

Each pressure vessel must be examined or tested every 5 years. The extent of the test or examination should be that necessary to determine that the pressure vessel’s condition is satisfactory and that the pressure vessel is fit for the service in- tended.

Should I put oil in my air compressor tank?

The purpose of oil in an air compressor tank is to lubricate the moving parts of your equipment and prevent corrosion.

What causes compressor overload?

An overload might open due to: A lack of maintenance. If the outdoor coil gets dirty it can raise the head pressure and make the unit run hot. A defective run or start capacitor.

What is preventive maintenance checklist?

A preventive maintenance checklist is a set of tasks that the technician needs to complete in order to close a preventive maintenance work order. A checklist gets all the steps and information out of a manual and into the hands of experienced technicians by standardizing PMs in your CMMS.

Why rely on Atlas Copco?

Rely on trained Atlas Copco technicians and the unrivalled quality of our genuine parts. “Energy consumption went down by 3% since we have the Preventive Maintenance Plan, so it more or less pays for itself.”

Why is preventive compressor maintenance so important?

The best way to ensure your business is running as well as it could is preventive compressor maintenance. One day of unplanned downtime can cost more than a yearly air compressor maintenance plan. Compressed air is to many businesses an absolutely critical part of the operations, as important as electricity, water and other utilities.

How to contact us for air compressor and vacuum pump maintenance?

Contact us today on 1800 023 469 to discuss our options for preventive air compressor and vacuum pump maintenance plans, it might be the best decision you make for your operations. With service technicians located all around Australia, we can offer on-site service nation-wide.

What should I do if my air compressor is too hot?

Air compressors generate a large amount of heat which, combined with the higher ambient temperatures, can lead to issues. Monitoring and logging compressor temperature throughout the course of the day can help you take quick action if their temperatures rise too high. You’ll also want to check that the cooler is functioning appropriately!