How do I reset my throttle body control?

The easiest way to reset your throttle position sensor is to unhook the negative cable from your battery for up to five minutes or to remove the fuse for your engine control module.

Do you have to calibrate a throttle body?

Once you have fitted a Throttle Position Sensor, or TPS, you will need to calibrate it from within MEITE. First, be sure you have correctly wired, and assigned the throttle sensor signal input to “TPS Raw” in the Analog Settings.

How do I calibrate my accelerator pedal position sensor?

To calibrate the accelerator pedal assembly: To recalibrate the ECM and accelerator pedal, the ignition switch must be in the ON position and then the accelerator pedal must be slowly and fully depressed from idle to full throttle. Repeat the procedure three times.

Does a throttle body need to be calibrated?

Can I relearning the throttle body on a 2006 Ford Five Hundred?

Answers are provided for free. Re: Relearning the throttle body on a 2006 Ford Five Hundred. Look in your owner’s handbook for information on battery replacement. It will inform you of the procedure to be followed following the replacement.

How do you reset the throttle body on a Ford F-150?

Now To “relearn” the Ford F-150’s throttle body, park the vehicle on a level surface and engage the parking brake while shifting into park. Turn off all of your accessories. Start the engine and let it run until it reaches operating temperatures, then turn off the engine and let it idle for at least one minute.

What is the Ford idle relearn technique?

The Ford idle relearn technique is detailed in an owner’s handbook under the heading “Battery Maintenance and Specification.” It serves as an excellent illustration of how owner’s manuals are often overlooked, despite the fact that they are a valuable source of information for your own automobiles.

How do you train the throttle body on a Ford Fusion?

Hot The Ford Fusion’s throttle body must be “re-trained” by parking the vehicle on a flat surface, applying the parking brake, and shifting the transmission into park. Turn off all of your accessories. Start the engine and let it run until it reaches operating temperatures, then turn off the engine and let it idle for at least one minute.