How can I configure my UTStarcom modem for BSNL broadband?

Setup BSNL Type 2 ADSL Modem WA3002 -g1 UTStarcom

1. Connect to computer.
2. Login to Setup Page.
3. Click on Advanced Setup.
4. Edit VPI settings of PPPoE connection in WA3002 BSNL Modem.
5. Select PPPoE from the list of network protocols and click next.
6. BSNL Username and Password.
7. Choose Save/Reboot WA 3002 -g1 ADSL BSNL Modem.

How can I program my BSNL modem?

Modem configuration:

1. In the Internet Explorer, type 192.168.1.1 and press enter.
2. Type username as admin and password as admin and press OK.
3. Click “Advanced Setup”
4. Click Edit button against VPI/VCI -0 and 35.
5. Click Next in the above screen.
6. Select PPP over Ethernet (PPPoE) in the above screen.

How can I update my BSNL modem firmware?

Open Browser Logon to ONU / ONT page (http://192.168.1.1 is the most common address. Modem configuration Page address, Default Username & Password etc will be printed at the back side of your modem). 2. Once logged in Go to Management > Device > Upgrade > Select Respect Firmware and Upgrade.

What is PPPoE username and password?

Point to Point Protocol over Ethernet (PPPoE) is a type of broadband connection that provides authentication (username and password) in addition to data transport. Most DSL providers use PPPoE to establish Internet connections for customers.

What is ISP username and password?

Find Your Internet Service Provider The default username and password for many routers is “admin” and “admin.” Try that first and see if that works. If it doesn’t, you can find the typical default username and password for the most common routers online.

How do I configure my broadband modem?

Connect your router

1. Firstly, unplug or turn off the cable or DSL modem.
2. Plugin your wireless router and connect the network cable into the port on the router that is labelled “Internet” or “WAN.”
3. Connect the other end to the cable or DSL modem and start up the modem.

How do you update ONU?

Steps to Upgrade FTTH ONU / ONT Firmware

1. Open Browser Logon to ONU / ONT page (http://192.168.1.1 is the most common address.
2. Once logged in Go to Management > Device > Upgrade > Select Respect Firmware and Upgrade.
3. After upgrade again login to modem and change the modem password.